We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 78 cm IDE 4-pin male to five SATA 15-pin female power splitter cable with flat flexible wires

BUCIER

BUCIER LH-140 IDE to 5×SATA Power Splitter Cable 78cm

SKU CH-JDSV-W8F08

Converts one 4-pin IDE connector into five SATA power ports using 78 cm of 18 AWG copper cable

  • TypeSATA
  • ColorBlack
  • Length78
  • Terminal GenderMale-to-Female
  • Speed0 kilobytes_per_second
  • ConductorCopper
  • Converts one 4-pin IDE connector into five SATA power ports
  • 18 AWG copper conductors deliver reliable high-current supply
  • 78 cm total length with 24 cm lead and four 13.8 cm branches
  • Flat parallel ribbon keeps wiring neat and airflow clear
  • Moulded one-piece plugs prevent degumming and ensure firm contact

IDE-to-SATA power splitter

The BUCIER LH-140 cable converts a single 4-pin IDE male connector into five 15-pin SATA female connectors. It is built for PC builders who need to power multiple SATA hard drives or optical drives from a legacy Molex-style supply. The 78 cm total length uses 18 AWG copper conductors to handle the combined current draw of up to five drives.

Sustained power delivery

The parallel flat design keeps the wires neat inside the case and reduces resistance across all five branches. Each SATA head receives power from the same 4-pin source, so the cable is suited for steady loads such as storage arrays or optical drives rather than short bursts. Copper construction and moulded connectors aim to maintain consistent contact during continuous operation.

SATA power interface limits

The splitter only works with devices that accept standard 15-pin SATA power; connecting it to incompatible ports can damage components. It does not convert data signals, so each drive still requires its own SATA data cable to the motherboard. The 24 cm lead to the first connector and 13.8 cm spacing between subsequent heads set the practical reach inside the chassis.

Highlights

  • Converts one 4-pin IDE connector into five SATA power ports
  • 18 AWG copper conductors deliver reliable high-current supply
  • 78 cm total length with 24 cm lead and four 13.8 cm branches
  • Flat parallel ribbon keeps wiring neat and airflow clear
  • Moulded one-piece plugs prevent degumming and ensure firm contact

Specifications

BrandGELRHONR
ModelLH-140
TypeSATA
ColorBlack
Length78
Terminal GenderMale-to-Female
Speed0 kilobytes_per_second
ConductorCopper
FeaturesFlexible Cable

Questions about this item

Does the LH-140 splitter cable run hot or draw extra power when all five SATA drives are spinning continuously?

The cable uses 18 AWG copper conductors rated for high current, so it delivers power without adding heat of its own; the drives determine the total draw.

My power supply only has 4-pin Molex connectors — will the LH-140 plug straight in?

Yes, the single 4-pin IDE male plug on the LH-140 mates directly with any standard Molex connector from the PSU.

Can I keep using my older IDE hard drive while also connecting newer SATA drives through this splitter?

The LH-140 only provides 15-pin SATA power outputs, so it cannot power an IDE drive; you would need a separate Molex connection for that drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.