We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black HDMI splitter box with three ports and power input

BUCIER

BUCIER HDMI Splitter 1x2 4K Mirror Only 10.2 Gbps internal power cable

SKU CH-62HR-3XS6Q

Mirrors one HDMI source to two displays at up to 4K using 10.2 Gbps bandwidth and requires external 5 V power

  • Color1x2 no HDMI Cable & Adapter
  • Connector Number3
  • Mirrors one 4K source to two displays simultaneously
  • 2 Gbps bandwidth carries 3D and 1080p signals
  • Powered operation ensures stable output across both screens
  • Supports 1080p transmission up to 52 ft total cable length
  • Mirror-only design — no extended desktop or ARC support

Mirror-only 1×2 HDMI splitter

This 1×2 HDMI splitter takes a single HDMI source and duplicates it to two displays in mirror mode only. It is built for users who need identical content on both screens without extended-desktop capability. Home entertainment fans, presenters, educators, gamers and office professionals can all use it to show the same video and audio on two monitors, TVs or projectors at once. The unit requires an external 5 V 1 A power adapter to operate.

10.2 Gbps bandwidth with 4K and 1080p support

The splitter passes up to 10.2 Gbps, handling 4K resolution as well as 1080p and 3D signals. At 1080p it works with AWG26 HDMI 2.0 cables for a total run of 52 ft (26 ft in + 26 ft out), allowing duplication across separate rooms. It does not support ARC or eARC, cannot connect audio devices such as speakers, and cannot function as a multi-input switcher.

Passive thermal design with external power

Because the splitter draws its 5 V 1 A supply from an external adapter, the unit itself has no fan or active cooling and runs silently. Power consumption stays low in normal mirror operation, and the compact enclosure dissipates heat passively. No internal fan noise or additional case clearance is needed.

Highlights

  • Mirrors one 4K source to two displays simultaneously
  • 2 Gbps bandwidth carries 3D and 1080p signals
  • Powered operation ensures stable output across both screens
  • Supports 1080p transmission up to 52 ft total cable length
  • Mirror-only design — no extended desktop or ARC support

Specifications

Color1x2 no HDMI Cable & Adapter
Connector Number3

Questions about this item

What does the 10.2 Gbps bandwidth mean for my 4K setup?

It carries 4K resolution at standard refresh rates with full audio and video, mirroring the same signal to both outputs without loss or delay.

Which HDMI version does the 10.2 Gbps rating correspond to and what limits does it set?

The 10.2 Gbps rating aligns with HDMI 2.0 and caps the splitter at 4K mirroring only — no extended desktop, ARC, or switching between multiple sources.

How long can my HDMI cables be when running 1080p through this splitter?

With AWG26 HDMI 2.0 cables you can run up to 52 ft total — 26 ft from source to splitter and 26 ft from splitter to each display — at 1080p resolution.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.