We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular ARGB controller with three buttons and SATA power connector

BUCIER

BUCIER ARGB Controller 5V 3-pin SATA Power Cable

SKU CH-XJXG-K5MEF

Controls 5V 3-pin ARGB lighting via built-in modes powered by SATA, no motherboard header required

  • ColorBlack
  • Controls 5V 3-pin ARGB devices without motherboard header
  • Powered directly from SATA connector on PSU
  • Built-in lighting modes selectable via simple buttons
  • Manual speed and colour adjustment with M, S, C keys
  • Compact controller expands cable reach for most chassis

Standalone ARGB Controller for 5V Devices

This BUCIER controller adds addressable lighting to 5V 3-pin ARGB fans, strips, water blocks or radiators without requiring a compatible motherboard header. It draws power directly from a SATA connector on the power supply and uses built-in modes to drive the connected lighting. The compact button module lets you cycle modes, adjust speed and change colours manually.

For systems lacking a 5V ARGB header

Builders whose motherboards have no 5V 3-pin ARGB connector, or who prefer not to use software control, can add synchronized lighting effects with this unit. It is not suitable for setups that require motherboard-addressable control, software-driven effects across multiple zones, or power delivery beyond what a single SATA connection provides.

5V 3-pin ARGB output powered by SATA

The decisive specification is the 5V 3-pin ARGB output combined with SATA power input, which determines whether your addressable RGB devices can be driven without a motherboard ARGB header.

Highlights

  • Controls 5V 3-pin ARGB devices without motherboard header
  • Powered directly from SATA connector on PSU
  • Built-in lighting modes selectable via simple buttons
  • Manual speed and colour adjustment with M, S, C keys
  • Compact controller expands cable reach for most chassis

Specifications

BrandXMSJSIY
ModelY-2
ColorBlack

Questions about this item

What ARGB devices can I connect to the BUCIER controller?

The controller works with any 5 V 3-pin ARGB product — chassis fans, light strips, LED boards, air or liquid cooler lighting — that draws power from a SATA connector.

My motherboard lacks a 5 V ARGB header; will this controller still let me run lighting effects?

Yes. The unit plugs directly into a SATA power connector and uses its own built-in modes, so no motherboard ARGB header or software is required.

How can I verify the controller is operating correctly after I install it?

Press the M button to cycle through the built-in lighting modes; use the S button to change speed and the C button to shift colours or reverse direction — visible changes confirm normal operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.