We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black right-angle USB 3.1 Type-E adapter male to female 2.2 by 1.5 by 1 cm

BUCIER

BUCIER 90° Up-Angle USB 3.1 Type-E Male to Female Adapter (PH74A)

SKU CH-DRM3-6SJ9W

A 90-degree up-angle adapter connects a 19-pin motherboard header to a USB 3.1 Type-E front-panel port at 10 Gbps

  • Type19 pin to type e 3.1
  • Color1 Pack
  • Cable Lengthinches
  • Changer Type19 pin to type e 3.1
  • Specifications19 pin to type e 3.1 Adapters device
  • Connector A19 pin to type e 3.1
  • Up-angled 90° header clears tight case space
  • 10 Gbps Type-E male plug keeps full USB 3.1 speed
  • 19-pin to 20-pin TYPE-E fit works with standard motherboard headers
  • Plastic-and-metal build weighs only 10 grams for light installs
  • Plug-and-play design needs no drivers or extra power

Right-angle Type-E adapter

The BUCIER PH74A redirects a 19-pin motherboard header into an upward-facing Type-E socket. It suits builders whose front-panel cable clashes with a graphics card or a tight chassis corner. The 90-degree bend keeps the cable running parallel to the board instead of projecting outward.

Sustained 10 Gbps throughput

Rated at 10 Gbps, the adapter maintains USB 3.1 Gen 2 speeds during long file transfers without throttling. Gold-plated contacts on both the 20-pin male header and the female Type-E port resist oxidation that can degrade signal integrity over time. Plastic-and-metal construction absorbs normal vibration inside a running system.

Plug-and-play header installation

Power off the system, unplug the mains lead and wait 20 seconds before fitting the adapter to avoid shorting pins. Align the keyed 19-pin connector with the motherboard header and press straight down; no drivers or BIOS changes are required. Verify you need the PH74A up-angled version rather than the PH74B down-angled variant before ordering.

Highlights

  • Up-angled 90° header clears tight case space
  • 10 Gbps Type-E male plug keeps full USB 3.1 speed
  • 19-pin to 20-pin TYPE-E fit works with standard motherboard headers
  • Plastic-and-metal build weighs only 10 grams for light installs
  • Plug-and-play design needs no drivers or extra power

Specifications

BrandAAOTOKK
Type19 pin to type e 3.1
Color1 Pack
Cable Lengthinches
Changer Type19 pin to type e 3.1
Specifications19 pin to type e 3.1 Adapters device
Connector A19 pin to type e 3.1
Connector B19 pin to type e 3.1
FeaturesPC
Weight10 grams
Package Quantity1

Questions about this item

Does the 90° up-angle adapter generate extra heat or draw more power when the front-panel USB 3.1 port runs all day?

No, the passive PH74A adapter has no active components, so it adds no measurable heat or power draw beyond the 10 Gbps USB 3.1 signal passing through.

What must my motherboard already provide for this PH74A adapter to work?

A standard 20-pin internal USB 3.1 Type-E header; the adapter simply re-routes that existing header upward at 90°.

Will the PH74A sit cleanly beside a legacy 19-pin USB 3.0 front-panel header on the same board?

Yes, the 2.2 cm × 1.5 cm footprint keeps the up-angled Type-E socket clear of adjacent 19-pin headers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.