Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
BUCIER
A two-pack of 0.5 m Mini-SAS SFF-8087 to four SATA 90-degree breakout cables for connecting a RAID controller to four drives at 6 Gb/s per drive
This two-pack provides a Mini-SAS SFF-8087 male host connector that splits into four right-angle SATA 7-pin female targets. Each cable runs 0.5 metres and supports 6 Gb/s per drive. The 30 AWG conductors keep the assembly thin and flexible for tight chassis routing. Locking latches on both ends secure the link against vibration.
Connect the 36-pin SFF-8087 plug to a SAS HBA, RAID card or motherboard port; the four 90-degree SATA tails plug directly into HDDs, SSDs or a backplane. The forward breakout layout means the host end stays at the controller while the drive ends fan out, simplifying cable management in dense storage builds. No additional adapters or interposers are required.
Builders currently running individual SATA leads from a controller can consolidate to a single mini-SAS link, reducing clutter and improving airflow. The jump is worthwhile when a controller exposes SFF-8087 ports and four drives share the same enclosure zone. Not suited for backplanes that expect an SFF-8087 target connector or for configurations needing straight SATA plugs.
| Brand | ADCAUDX |
|---|---|
| Model | DC-0036 |
| Type | Mini-SAS Cables |
| Color | Black/Blue |
| Length | 1.6 |
| Speed | 6 gigabytes_per_second |
| Conductor | Copper |
| Features | SFF-8087 to 4x SATA 90 Degree |
The right-angle design keeps the cable flush against the drive, so only the connector height itself is required; no extra bend radius is needed.
The thin 30 AWG copper wires are rated for the 6 Gbps per drive signal and remain cool under normal sustained transfer loads.
A SAS HBA, RAID card or motherboard with an internal SFF-8087 36-pin male port is required on the host side.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?