We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 20cm M.2 M-key NVME extension cable with 270-degree connector, gold contacts, flexible PVC jacket

BUCIER

BUCIER 270 Degree M.2 M-Key NVME SSD Extension Cable 20cm

SKU CH-74X5-9WS2J

Extends NVME M.2 M-Key SSDs 20 cm with a 270-degree connector, supporting 2230, 2242, 2260 and 2280 sizes at up to 64 Gbps

  • Extends NVME SSDs with a 270 degree connector for tight spaces
  • Supports 2230, 2242, 2260 and 2280 NVME drives up to 2280 cable end
  • Delivers NVMe 1.4 speeds up to 64Gbps through four-layer gold-plated PCB
  • Flexible 20cm PVC cable keeps signal stable in compact builds
  • Includes screwdriver, four silver screws and a standoff for easy install

270 Degree M.2 NVME Extension

This 20cm cable extends an M.2 M-Key NVME SSD from a 2230 2242 2260 or 2280 socket to a 2280 cable end. It supports NVME 1.4 with data rates up to 64Gbps. The four layer PCB with gold plating keeps signals stable. Builders who need SATA conversion or a different key type cannot use this cable.

Thermals Noise and Power Draw

The flexible PVC cable adds no active cooling and draws no extra power beyond the drive itself. It produces no noise because it has no moving parts. The lightweight design does not affect system airflow. Users who need active thermal management must rely on the drive’s own heatsink or motherboard cooling.

Sustained Load Behaviour

Under continuous NVME 1.4 traffic the gold plated four layer board maintains signal integrity at 64Gbps. The 270 degree connector orientation reduces mechanical stress during long runs. No throttling is introduced by the cable itself. Installers who need longer reach than 20cm must choose a different length.

Highlights

  • Extends NVME SSDs with a 270 degree connector for tight spaces
  • Supports 2230, 2242, 2260 and 2280 NVME drives up to 2280 cable end
  • Delivers NVMe 1.4 speeds up to 64Gbps through four-layer gold-plated PCB
  • Flexible 20cm PVC cable keeps signal stable in compact builds
  • Includes screwdriver, four silver screws and a standoff for easy install

Specifications

BrandMustpoint
ModelK250609

Questions about this item

How do I install the 270 degree M.2 NVME extension cable without damaging the connector?

Align the M-key notch on the NVME SSD with the cable socket, press straight down until the screw hole lines up, then secure with the included standoff and silver screw — forcing it at an angle bends the fragile 64Gbps signal pins.

What maintenance does the four-layer gold-plated cable need over time?

No scheduled maintenance is required; if signal errors appear, reseat both ends and check the screws for loosening caused by chassis vibration.

At what point does the 20cm cable length limit sustained 64Gbps NVME 1.4 throughput?

The 20cm length is within PCIe trace specifications, so the first limit under sustained load is usually the SSD controller thermal throttle, not the cable itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.