We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black and blue braided cables with an SFF-8643 connector splitting to four SATA connectors

BUCIER

BUCIER 2-Pack SFF-8643 to 4 SATA Cable 0.5 m

SKU CH-TFGZ-9W0TK

Two-pack of 0.5 m SFF-8643 to four SATA breakout cables for connecting a RAID controller to four drives

  • TypeMini-SAS Cables
  • ColorBlack+Blue
  • Length1.6
  • ConductorCopper
  • FeaturesBraided
  • Connect up to four drives per cable
  • 5 m length keeps server chassis tidy
  • Locking latches on both ends secure links
  • 30 AWG conductors stay flexible in tight bends
  • Two cables included for dual-controller setups

Two-pack 0.5 m SFF-8643 to SATA breakout

This BUCIER two-pack provides two internal SFF-8643 to 4 SATA breakout cables, each 0.5 m long. They connect a single Mini-SAS HD 12 Gbps HBA or RAID controller port to four SATA hard drives or SSDs. The cables use 30 AWG conductors with braided sleeving and feature locking latches on both ends for secure retention.

Suits RAID or HBA expansion, not backplane SFF-8643

These cables are designed for builders adding SATA drives to a Mini-SAS HD 8643 host port on a controller or motherboard. They will not work if the target backplane or enclosure presents an SFF-8643 connector, because the host-side plug is male SFF-8643 and the breakout end is four SATA females. Buyers needing SFF-8643 on both ends or a reverse breakout should look elsewhere.

12 Gbps SAS host to 6 Gbps SATA target

The host-side SFF-8643 interface supports SAS 12 Gbps signalling, while each of the four SATA connectors operates at up to 6 Gbps per drive. This asymmetry decides whether the cable matches your controller and drive speeds. Verify that your HBA or RAID card exposes an internal SFF-8643 port and that your drives are SATA before installing.

Highlights

  • Connect up to four drives per cable
  • 5 m length keeps server chassis tidy
  • Locking latches on both ends secure links
  • 30 AWG conductors stay flexible in tight bends
  • Two cables included for dual-controller setups

Specifications

BrandADCAUDX
ModelHD MINISAS-004
TypeMini-SAS Cables
ColorBlack+Blue
Length1.6
ConductorCopper
FeaturesBraided

Questions about this item

What controller or motherboard port do I need to plug the SFF-8643 end into?

The cable requires a 12Gbps SAS HBA or RAID controller with an internal HD Mini-SAS SFF-8643 male port.

Will the 6Gbps per-drive limit bottleneck my older 3Gbps SATA drives?

Each of the four SATA 7-pin female connectors runs at up to 6Gbps, so 3Gbps drives will operate at their native speed without bottleneck.

How can I verify the link is running at 6Gbps after installation?

Check the controller BIOS or OS disk utility; each attached drive should report a negotiated SATA 6Gbps link speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.