We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 15-pin SATA male to four female splitter cable 40cm

BUCIER

BUCIER 15 Pin to 4 SATA Power Splitter Cable 40cm

SKU CH-K8W3-FSACT

Connects four SATA drives to one 15-pin power supply connector using 18 AWG copper wire at 40 cm length

  • TypeSATA
  • ColorBlack
  • Connector Detail15pin Sata
  • Terminal GenderMale-to-Female
  • ConductorCopper
  • FeaturesData Transfer
  • Powers four drives from one PSU connector using 15-pin SATA splitter
  • 18AWG tinned copper conductors support 3.3V, 5V and 12V rails
  • 40cm harness with 4.0 inch spacing eases internal cable routing
  • Secure click-fit receptacles prevent accidental disconnection during operation
  • Standardised interface allows quick plug-and-play with SATA HDDs, SSDs and optical drives

15 Pin to 4 SATA Splitter

This BUCIER cable splits a single 15 pin SATA power connector into four female receptacles. It connects up to four HDDs, SSDs, optical drives or PCI-E cards from one power supply output. The 40 cm harness spaces each receptacle at 4.0 inch intervals for tidy routing inside the case.

Thermals Noise Power

Standard 18 AWG tinned copper conductors carry 3.3V, 5V and 12V rails without degradation across SATA I, II and III devices. The flexible harness minimises airflow obstruction in typical chassis layouts. No active cooling or fan is present so the assembly adds zero acoustic noise to the build.

Molded Construction Benefits

The one-piece moulded design eliminates degumming and burrs while providing strong toughness and wear resistance. Each interface follows the SATA standard for easy insertion and removal with secure click retention. This ensures good contact, fast data transmission and no bad contact during drive swaps.

Highlights

  • Powers four drives from one PSU connector using 15-pin SATA splitter
  • 18AWG tinned copper conductors support 3.3V, 5V and 12V rails
  • 40cm harness with 4.0 inch spacing eases internal cable routing
  • Secure click-fit receptacles prevent accidental disconnection during operation
  • Standardised interface allows quick plug-and-play with SATA HDDs, SSDs and optical drives

Specifications

BrandBUCIER
Model1 to 4 SATA
TypeSATA
ColorBlack
Connector Detail15pin Sata
Terminal GenderMale-to-Female
ConductorCopper
FeaturesData Transfer

Questions about this item

How do I connect the 15-pin male plug to my power supply and avoid loose drives?

Push the 15-pin male connector firmly into the PSU SATA power port until it clicks; the snug fit prevents accidental disconnection. Route the 16-inch harness so the four female receptacles, spaced at 4.0-inch intervals, reach each drive without tension.

Will the 18 AWG tinned copper conductors need replacement over time?

The 18 AWG tinned copper wires are rated for continuous 3.3V, 5V and 12V delivery; under normal internal use they do not require scheduled replacement. Inspect for physical damage if you reconfigure drives.

How many drives can I run simultaneously before voltage drop becomes an issue?

The splitter is designed to power up to four SATA devices — HDDs, SSDs, optical drives or PCIe cards — from a single PSU connection using standard 18 AWG conductors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.