We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 120 mm PCIe 3.0 x4 riser cable with 90-degree female connector and 64 gold contacts

BUCIER

BUCIER 120mm PCIe 3.0 X4 Riser Cable internal power cable

SKU CH-HV1N-WZ8RZ

A PCIe 3.0 x4 riser cable extending a slot by 120 mm with a 90-degree connector for flexible card placement

  • ColorBlack
  • PCIe 3.0 x4 bandwidth up to 4 GB/s for M.2, Wi-Fi and sound cards
  • 64-pin full-function design supports 2.5 G diskless-boot, capture and RAID cards
  • 90-degree female slot accepts x1, x4, x8 and x16 expansion cards
  • Tinned-copper Teflon core with PVC jacket bends 180° without signal loss
  • Plug-and-play installation in anti-static bag; avoid touching gold fingers for best performance

What the cable does

This BUCIER riser cable carries a PCIe 3.0 x4 link over a 120 mm flexible tail so you can mount M.2, Wi-Fi, FireWire, USB or sound cards away from the motherboard slot. The 64-pin connector handles every lane configuration from x1 to x16 and is backward compatible with PCIe 2.0 and 1.0.

Who should use it and who should not

Builders who need to relocate a low-profile expansion card in a tight chassis will appreciate the 90-degree female socket and 180-degree bend radius. Users looking for hot-plug support or a longer reach than 120 mm should look elsewhere.

How it fits the build

The tinned-copper core wrapped in Teflon and PVC lets you route the cable around drive cages or behind the motherboard tray without signal loss. Plug the male end into the board, seat the card in the right-angle slot, and the assembly stays secure inside an anti-static environment.

Highlights

  • PCIe 3.0 x4 bandwidth up to 4 GB/s for M.2, Wi-Fi and sound cards
  • 64-pin full-function design supports 2.5 G diskless-boot, capture and RAID cards
  • 90-degree female slot accepts x1, x4, x8 and x16 expansion cards
  • Tinned-copper Teflon core with PVC jacket bends 180° without signal loss
  • Plug-and-play installation in anti-static bag; avoid touching gold fingers for best performance

Specifications

BrandBUCIER
ModelPCIE30-X4-120MM-0090D
ColorBlack

Questions about this item

What motherboard slot is needed for the PCIe 3.0 x4 riser cable?

A free PCIe x4, x8 or x16 slot running at Gen 3.0 or Gen 2.0 will carry the four-lane signal.

Will a PCIe 2.0 x1 capture card work in the 90-degree female socket?

Yes, the socket accepts x1, x4, x8 and x16 cards and the cable is backward compatible with Gen 2.0 and Gen 1.0.

How can I verify the link is running at the expected 3.0 x4 speed after installation?

Check the negotiated link width and speed in the OS device manager or BIOS; it should show x4 at Gen 3.0.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.