We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Bryant

Bryant BRY8200ITR 15 A 125 V straight blade plug

SKU CH-6DPY-HVN3T

A 15 A, 125 V straight-blade receptacle with tamper-resistant shutters and a .5 hp rating for heavy-use hospital-grade applications

  • Hospital-grade durability backed by 15 A 125 V rating
  • Tamper-resistant shutters protect against accidental contact
  • Nylon housing resists impact and chemical exposure
  • Half-horsepower motor capacity for demanding equipment
  • Flush-mount design fits standard duplex openings cleanly

Hospital-grade 15 A receptacle

The Bryant BRY8200ITR is a 15 A, 125 V AC straight-blade duplex receptacle built for heavy-use hospital-grade environments. It accepts two-pole, three-wire plugs and carries a half-horsepower rating. The ivory nylon body mounts flush and uses wire-lead termination. Tamper-resistant shutters help prevent accidental contact.

Verify voltage, amperage and mounting

Confirm the circuit supplies 125 V AC and is protected by a 15 A breaker before installation. The device requires a standard flush-mount box and wire-lead connections; ensure your wiring method matches. It is not weather-resistant, so select a dry, indoor location. Tamper-resistant shutters are present, but surge suppression is not included.

Nylon body runs cool with minimal noise

The nylon housing dissipates heat effectively during normal 15 A loads, so the receptacle stays cool to the touch. No moving parts or fans mean completely silent operation. Power draw follows the connected equipment up to the rated 15 A and 0.5 hp; the receptacle itself adds no measurable consumption.

Highlights

  • Hospital-grade durability backed by 15 A 125 V rating
  • Tamper-resistant shutters protect against accidental contact
  • Nylon housing resists impact and chemical exposure
  • Half-horsepower motor capacity for demanding equipment
  • Flush-mount design fits standard duplex openings cleanly

Specifications

BrandBRYANT

Questions about this item

Does the BRY8200ITR receptacle come with mounting screws and a wall plate, or do I need to buy them separately?

The receptacle is supplied as the device only; mounting screws and a wall plate are not included and must be purchased separately.

Should I choose the 15 A 125 V version or a different amperage for a standard household circuit?

The 15 A 125 V rating matches standard North American 5-15R household circuits, making it the correct choice for general-purpose duplex outlets.

What does the 1/2 hp rating mean when I plug a motor load into this receptacle?

The 1/2 hp rating indicates the receptacle is tested to switch motor loads up to one-half horsepower at 125 V AC without contact welding or overheating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.