We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray nylon flush-mount electrical receptacle with screw terminals

Bryant

Bryant 5361GRY Electrical Box

SKU CH-Y4J4-GS1YM

A 20 A, 125 V AC straight-blade receptacle with back and side screw terminals, flush-mount nylon housing, and CSA/UL certification

  • TypeWiring Devices
  • 20 A rated for heavy-duty circuits
  • 125V AC compatible with standard wiring
  • Grounded 2-pole 3-wire safety design
  • UL Listed and CSA Certified compliance
  • Nylon housing resists corrosion and impact

Bryant 5361GRY Straight Blade Receptacle

The Bryant 5361GRY is a single-gang straight-blade receptacle rated at 20 A and 125 V AC. It uses a NEMA 5-20R configuration with two poles and three wires for grounded, polarised connections. The grey nylon housing resists corrosion and is designed for flush mounting in residential or commercial wiring projects. Electricians and DIY installers needing a standard 20-amp outlet will find this device matches the requirement.

Thermals noise and power draw

As a passive wiring device the receptacle generates no operational noise and draws no power of its own. Normal use produces no measurable heat beyond what the connected load creates through the screw terminals. The corrosion-resistant nylon housing maintains its properties across typical indoor temperature ranges without active cooling. Power dissipation depends entirely on the downstream equipment plugged into the outlet.

Deciding specification

The NEMA 5-20R rating of 20 A at 125 V AC is the single specification that determines whether this receptacle suits the circuit. It accepts both back and side wiring methods using screw terminals for secure conductor attachment. Buyers who need a different amperage, voltage or NEMA configuration must select another device. This unit is not GFCI or AFCI protected so circuits requiring those protections need separate devices.

Highlights

  • 20 A rated for heavy-duty circuits
  • 125V AC compatible with standard wiring
  • Grounded 2-pole 3-wire safety design
  • UL Listed and CSA Certified compliance
  • Nylon housing resists corrosion and impact

Specifications

BrandBRYANT
TypeWiring Devices

Questions about this item

How do I wire the screw terminals on the 5361GRY receptacle?

Connect wires to the back or side screw terminals; tighten each screw firmly so the conductor is fully seated and no copper is exposed.

What part of the 5361GRY will need replacement first?

The nylon housing and screw terminals are rated for long service; replace the unit if the housing cracks, terminals loosen, or corrosion appears.

At what load does the 5361GRY reach its thermal limit?

The device is rated for 20 A at 125V AC continuous; sustained current above 20 A will cause overheating and trip the circuit breaker.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.