We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey plastic DIN-rail power supply, 45 mm wide, green LED indicator

PULS Power

PULS Power ML60.241 DIN Rail Power Supply 60W 24-28V DC

SKU CH-6030-2TFTK

DIN-rail switching supply delivering 24–28 V DC at 2.5 A from 100–240 V AC, 60 W, IP20 plastic case, -10 °C to 70 °C operating range

  • TypePower Quality & Distribution
  • Wide 100–240 V AC input suits global mains
  • 24–28 V DC output adjustable for 24 V systems
  • 60 W / 2.5 A delivers steady power to loads
  • Slim 45 mm DIN-rail housing fits tight cabinets
  • Green LED status indicator shows operation at a glance

DIN-rail power supply for control cabinets

The PULS ML60.241 is a compact switching supply that mounts on a standard DIN rail and delivers 24 to 28 V DC at 2.5 A. It accepts 100 to 240 V AC or 110 V DC input, making it suitable for panels that need a reliable 60 W source in a 45 mm wide plastic housing. A green LED shows output status at a glance.

Input range and environmental limits

The unit operates from -10 °C to 70 °C and meets IP20 protection, so it must be installed inside an enclosure. Hold-up time is 24 ms and output ripple is 50 mV, which defines the ride-through and noise floor for sensitive loads. Single-phase 50 to 60 Hz supply is required.

60 W at 2.5 A decides the fit

If your load draws more than 2.5 A at 24 V you will need a higher-rated supply. The fixed 60 W rating and NEC Class 2 compliance mean it cannot serve circuits that demand more power or a different safety class. Check the current draw before specifying this model.

Highlights

  • Wide 100–240 V AC input suits global mains
  • 24–28 V DC output adjustable for 24 V systems
  • 60 W / 2.5 A delivers steady power to loads
  • Slim 45 mm DIN-rail housing fits tight cabinets
  • Green LED status indicator shows operation at a glance

Specifications

BrandPULS
TypePower Quality & Distribution

Questions about this item

Should I set the output to 24 V or 28 V for my application?

The unit provides an adjustable 24 to 28 V DC output; choose the voltage your load requires within that range.

Will the 60 W rating deliver 60 W continuously inside my cabinet?

Yes, it supplies up to 60 W at 2.5 A across the -10 to 70 °C operating range with 24 ms hold-up time.

Does the 100–240 V AC input cover 110 V DC sources too?

The input accepts 100 to 240 V AC and 110 V DC, so it works on both mains and common DC bus voltages.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.