Bryant
Bryant 4721NP straight blade plug Black/White 125V 15A 0.5 HP
A 15 A, 125 V straight-blade plug with nylon housing accepts cords from .300 to .655 in. and handles .5 HP loads
- ColorBlack/White
- MaterialHAWA
- TypeTraffic & Parking Lot
- Industrial-grade 125 V AC power for equipment up to .5 HP
- 15 A rating supports standard L5-15P devices and 2-pole 3-wire cords
- Nylon housing resists impact and wear in traffic and parking-lot environments
- Accepts cord diameters from .300 in to .655 in for flexible installation
- Non-shrouded straight-blade design enables quick, tool-free connection
Industrial Locking Plug
The Bryant 4721NP is a straight-blade locking plug rated for 125V AC at 15A and 0.5 HP. It suits industrial equipment and temporary power distribution where a secure, twist-lock connection prevents accidental disconnection under load.
Cord-Range Limit
The device accepts cords from .300 in to .655 in outer diameter, so cables outside that range cannot be terminated reliably. The 2-pole, 3-wire L5-15P configuration supports single-phase 125V service only and carries no IP rating for wet or dusty environments.
Nylon Housing
The non-shrouded body is moulded in black and white nylon for impact resistance and easy visual identification on a job site. Absence of corrosion-resistant or antimicrobial treatments limits long-term use to clean, dry indoor locations.
Highlights
- Industrial-grade 125 V AC power for equipment up to .5 HP
- 15 A rating supports standard L5-15P devices and 2-pole 3-wire cords
- Nylon housing resists impact and wear in traffic and parking-lot environments
- Accepts cord diameters from .300 in to .655 in for flexible installation
- Non-shrouded straight-blade design enables quick, tool-free connection
Specifications
| Brand | Bryant |
|---|---|
| Color | Black/White |
| Material | HAWA |
| Type | Traffic & Parking Lot |
Questions about this item
Which cord diameter range does the 4721NP accept?
The plug accepts cords from .300 in to .655 in outside diameter.
What load can the 0.5 HP rating handle on a 125 V circuit?
The 0.5 HP rating covers motor loads up to half a horsepower at 125 V AC.
How does the L5-15P configuration limit the connection?
The L5-15P locking interface caps the plug at 15 A and 125 V AC with a ground pin.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Ideal 2011s Splice Connector For 2014 Bare Copper Pack 50
- Bare Copper
Bryant Locking Straight Blade Plug L6-20P 20A 250V 2.0HP Black/White 70620
- HAWA



