Brute Networks
Brute Networks 16GB DDR4-2933 2Rx8 1.2v non-ECC UDIMM server RAM
16 GB DDR4 server memory running at 2933 MHz with 2Rx8 organisation and 1.2 V operation
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR3 2933 (PC3 23400)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredUnregistered
- 16 GB DDR4-2933 capacity handles heavy server workloads
- 2 V low-voltage operation reduces power draw and heat
- 2Rx8 dual-rank layout increases memory density per slot
- 100 % Dell-compatible module drops in without configuration changes
- Lifetime warranty protects the upgrade for the system's life
Dell-compatible 16GB DDR4-2933 UDIMM
This 16GB module is a Dell-compatible DDR4-2933 UDIMM built with major-brand chips. It runs at 1.2v and uses a 2Rx8 unregistered layout. The part matches Dell PN SNPRMWRNC/16G for drop-in server upgrades.
Upgrade from lower-capacity DDR4 UDIMMs
Replacing 8GB or smaller DDR4 UDIMMs with this 16GB stick doubles per-slot capacity while keeping the same 2933 MT/s speed and 1.2v voltage. The jump is worth it when your workload needs more memory channels filled without changing platform voltage or registered-buffer requirements.
Sustained load behaviour
Major-brand Samsung, SK Hynix or Micron ICs are 100% tested for continuous server operation at the rated 2933 MT/s speed. Identical modules ship together to avoid timing mismatches that can appear under prolonged multi-threaded workloads.
Highlights
- 16 GB DDR4-2933 capacity handles heavy server workloads
- 2 V low-voltage operation reduces power draw and heat
- 2Rx8 dual-rank layout increases memory density per slot
- 100 % Dell-compatible module drops in without configuration changes
- Lifetime warranty protects the upgrade for the system's life
Specifications
| Brand | Dell |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR3 2933 (PC3 23400) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Questions about this item
Does the 288-pin DDR4 UDIMM fit my Dell server memory slots?
Yes, the 288-pin DDR4 UDIMM is the standard form factor for Dell servers that accept PC4-23400 DDR4-2933 modules.
What is the correct way to seat the module so the 2Rx8 ranks are recognised?
Align the notch with the slot key, press straight down until both side clips click, then verify 16 GB appears in BIOS.
When should I expect to replace the 16 GB DDR4-2933 stick?
The module carries a lifetime warranty; replace only if diagnostics report errors or capacity needs change.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



