BoYata
BoYata OM4 LC-LC Duplex Multimode Fiber Patch Cable 75m Aqua
A 75 metre OM4 duplex multimode patch cable with LC connectors, aqua LSZH jacket and zirconia ceramic ferrules rated for 0.3 dB insertion loss and 30 dB return loss
- Low insertion loss of .3 dB with zirconia ceramic core
- High return loss of 30 dB ensures reliable data transmission
- LSZH aqua jacket provides fire safety and low smoke emission
- Supports 40/100 Gigabit applications in SAN and server farms
- 75 m duplex 50/125 µm multimode fiber with embossed A/B identification
75-metre OM4 duplex patch cable
This 75-metre OM4 multimode fibre patch cable uses LC duplex connectors and a 50/125 micron core. It is built for 40 and 100 Gigabit links in storage-area networks and server farms. The aqua LSZH jacket meets fire-safety and low-smoke requirements for indoor runs.
Low insertion loss and high return loss
The zirconia ceramic ferrules deliver insertion loss of .3 dB and return loss of 30 dB, keeping signal quality high over the full 75-metre length. LSZH construction adds no active cooling or power draw, so the cable adds no noise or heat to the rack.
Bend-friendly design with labelled clips
A 7.5 mm minimum bend radius and embossed A/B markers on the duplex clip and jacket tags simplify routing and port identification during installation and troubleshooting. The flexible jacket allows tight bends without exceeding the specified radius.
Highlights
- Low insertion loss of .3 dB with zirconia ceramic core
- High return loss of 30 dB ensures reliable data transmission
- LSZH aqua jacket provides fire safety and low smoke emission
- Supports 40/100 Gigabit applications in SAN and server farms
- 75 m duplex 50/125 µm multimode fiber with embossed A/B identification
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 75m LC duplex patch cable and what step is often missed?
Connect the LC duplex connectors to matching SFP+ or QSFP+ transceivers, then verify the embossed A/B markings on the clip and jacket tag rings so each fiber maps to the correct port — this identification step is frequently skipped.
What maintenance or replacement will the OM4 50/125 micron cable need later?
Inspect and clean the zirconia ceramic ferrules periodically; if insertion loss rises above the rated 0.3 dB or return loss drops below 30 dB, replace the patch cord.
What limit appears first on a 75 metre run under sustained 40G or 100G traffic?
The 75 metre length reaches the OM4 multimode distance ceiling for 40G and 100G Ethernet, so modal dispersion becomes the limiting factor before connector loss does.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



