We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular USB 3.0 panel-mount coupler with screw holes and LED indicator

Boxwave

Boxwave USB 3.0 Female to Female Panel Mount Adapter 5Gbps

SKU CH-C41Y-XF6VY

A USB 3.0 panel-mount coupler joins two cables through a standard D-type cut-out with screw fixings and an LED locator, supporting 5 Gbps data and USB 2.0 compatibility

  • TypeAdapters
  • Standard D-type panel fit simplifies installation
  • 5 Gbps transfer speed keeps data moving fast
  • LED indicator locates the port in darkness
  • Screw-mount design secures connection without soldering
  • Compatible with USB 2.0 devices for broad use

Panel-Mount USB 3.0 Coupler

This Boxwave adapter provides a USB 3.0 female-to-female connection designed for panel mounting in standard 86-size cut-outs. It suits installers who need a solderless, screw-fastened pass-through for PC, TV, projector, printer or laptop links in audio, video, optoelectronic or network racks. The built-in LED indicator helps locate the port in low-light conditions.

Thermals Noise Power

As a passive mechanical coupler the unit generates no heat, draws no power and produces no audible noise during normal data transfer. The 5 Gbps SuperSpeed interface remains electrically transparent so host and peripheral negotiate power management exactly as they would with a direct cable connection.

Sustained Load Behaviour

Under continuous high-throughput traffic the adapter maintains the full 5 Gbps signalling rate because it contains no active circuitry to throttle or overheat. Signal integrity depends entirely on the quality of the cables attached to each side, so long runs or marginal cables may limit real-world throughput. Buyers needing longer reach or active signal conditioning should look elsewhere.

Highlights

  • Standard D-type panel fit simplifies installation
  • 5 Gbps transfer speed keeps data moving fast
  • LED indicator locates the port in darkness
  • Screw-mount design secures connection without soldering
  • Compatible with USB 2.0 devices for broad use

Specifications

TypeAdapters

Questions about this item

How do I mount this USB 3.0 D-panel adapter in an 86 panel, and what step do installers often miss?

Cut the standard D-type opening in the 86 panel, insert the adapter from front or rear, then tighten the supplied screws; the step often missed is securing both screws evenly so the coupler sits flush without wobble.

What maintenance will this solderless panel-mount coupler need over time?

Periodically check that the mounting screws remain tight and blow dust from the female ports; no solder joints or active components require service, so mechanical inspection is the only upkeep.

What limit appears first when this adapter runs at 5 Gbps continuously?

The 5 Gbps USB 3.0 signalling ceiling is reached before any thermal or protocol bottleneck, so sustained throughput cannot exceed that rate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.