We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular adapter box with USB 3.0 cable and SATA IDE connectors visible

BONAEVER

BONAEVER USB 3.0 to SATA IDE hard drive adapter

SKU CH-SR3H-3WCZ7

Connects 2.5" and 3.5" SATA and IDE drives via USB 3.0 for data transfer with a 12 V power adapter included

  • Case TypeProtection Case
  • Connect 2.5" and 3.5" SATA and IDE drives simultaneously
  • Transfer data at up to 5 Gbps via USB 3.0
  • Power 3.5" drives reliably with included 12 V adapter
  • Works with Windows, Mac and Linux without drivers
  • Compact design fits in a laptop bag for portable access

Universal USB 3.0 to SATA and IDE Adapter

This adapter connects 2.5-inch and 3.5-inch SATA or IDE hard drives and optical drives to a USB port on Windows, Mac or Linux systems. It is aimed at technicians and home users who need quick access to bare drives for data recovery, duplication or archiving without installing them inside a case.

Capacity support and transfer headroom

The USB 3.0 interface delivers up to 5 Gbps bandwidth and the adapter handles SATA and IDE drives up to 5 TB. A supplied 12 V power adapter with an individual on/off switch provides stable power for 3.5-inch drives, while 2.5-inch units can run from the USB bus alone. Performance drops to USB 2.0 or 1.1 speeds when connected to older ports.

Replaces internal drive bays and legacy docks

It removes the need for spare SATA or IDE ports inside a desktop and supersedes single-protocol docks that only accept one drive type. The three-connector design lets you swap between 40-pin IDE, 44-pin IDE and SATA devices instantly. The jump is worthwhile when you regularly service mixed-age drives; it adds no value if you only ever use modern SATA SSDs.

Highlights

  • Connect 2.5" and 3.5" SATA and IDE drives simultaneously
  • Transfer data at up to 5 Gbps via USB 3.0
  • Power 3.5" drives reliably with included 12 V adapter
  • Works with Windows, Mac and Linux without drivers
  • Compact design fits in a laptop bag for portable access

Specifications

Case TypeProtection Case

Questions about this item

Will the adapter work with the 3.5" IDE drives I already own?

Yes, it supports both 2.5" and 3.5" IDE hard drives using the 40-pin and 44-pin connectors included on the device.

How can I confirm the USB 3.0 connection is running at full speed?

Check your operating system's device manager or system report to verify the drive is enumerated as a SuperSpeed USB device.

Does the kit include the power supply needed for 3.5" drives?

A 12V DC power adapter with individual on/off switches is supplied to power 3.5" SATA and IDE drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.