We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
PCIe 3.0 16x riser cable 20cm with 180-degree connector and EMI shielded flexible design

BONAEVER

BONAEVER PCIe 3.0 16x riser 20cm 180°

SKU CH-6GJ4-79HW1

A 20 cm PCIe 3.0 16x riser cable with a 180-degree connector and EMI shielding for flexible GPU placement

  • Case TypeProtection Case
  • EMI shielded design cuts signal interference
  • PCIe 3.0 16x support handles high-speed GPU data
  • 20 cm flexible cable allows versatile case routing
  • 180 degree connector angle fits tight build spaces
  • Gold plated contacts ensure reliable long-term conductivity

20 cm PCIe 3.0 16x Riser

This 20 cm flexible riser extends a PCIe 3.0 16x slot by 180 degrees. It uses high-speed shielded cable and a protected PCB to maintain signal quality. Gold-plated contacts and quality solder points provide reliable conductivity. The design suits custom builds that need to reposition a graphics card or other add-in card.

Builders with tight chassis clearance

The 180-degree bend and 20 cm length help route a card around obstacles in small-form-factor cases. It works with most GPU and motherboard combinations that use a standard 16x slot. Builds that require a straight extension, a different bend angle or a longer cable cannot use this riser.

180-degree bend angle

The fixed 180-degree orientation is the single specification that decides fit. Measure the space between the motherboard slot and the target card position to confirm the bend direction matches the build layout.

Highlights

  • EMI shielded design cuts signal interference
  • PCIe 3.0 16x support handles high-speed GPU data
  • 20 cm flexible cable allows versatile case routing
  • 180 degree connector angle fits tight build spaces
  • Gold plated contacts ensure reliable long-term conductivity

Specifications

Case TypeProtection Case

Questions about this item

Does the 20 cm PCIe 3.0 16x cable add noticeable heat or power loss when the GPU runs all day?

The 20 cm shielded cable is designed for high-speed PCIe 3.0 16x signals; gold-plated contacts and quality solder points keep resistance low so heat and power loss stay minimal during continuous use.

What must my motherboard and graphics card already provide for this riser to work?

Your motherboard needs a free PCIe x16 slot and the graphics card must use a standard PCIe x16 edge connector; the riser simply extends that connection 20 cm at a 180° angle.

Will an older PCIe 2.0 graphics card work properly through this 3.0 16x riser?

Yes — the riser is fully backward compatible, so a PCIe 2.0 card will run at its native speed through the PCIe 3.0 16x link without any configuration.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.