We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 36-pin SFF-8087 plug fans out into four 29-pin SFF-8482 connectors, each with a 15-pin SATA power port

BONAEVER

BONAEVER Mini-SAS SFF-8087 to 4× SFF-8482 SAS cable 3.3FT

SKU CH-3Y72-YCHN3

Connects a Mini-SAS SFF-8087 controller to four SATA drives using 29-pin SAS connectors with integrated 15-pin power, 3.3 ft length

Length 3.3 ft.

  • Connect RAID or PCIe controllers via SFF-8087
  • Power four SATA drives with 15-pin connectors
  • 29-pin SAS breakout carries data and power
  • Nylon braid bundles four leads for tidy routing
  • Labelled P1–P4 ends simplify installation

Breakout cable for RAID controllers

This BONAEVER cable converts a single Mini-SAS SFF-8087 port into four SFF-8482 connectors. It links a RAID or PCIe controller to SATA hard drives using a 3.3FT braided assembly. The 36-pin host end latches to the controller while each 29-pin target end carries both data and a 15-pin SATA power connection.

Integrated power adapters remove extra cables

Each breakout leg includes a built-in 15-pin SATA power plug so drives receive power directly from the cable. The nylon braid bundles the four legs together, reducing clutter and protecting against pulls from nearby power cables. Labelled P1–P4 tails simplify routing during installation in tight cases.

Suits builders adding SATA drives to a Mini-SAS

The cable works only with SATA drives and will not function with SAS drives or when the SFF-8087 end is plugged into a backplane. Buyers needing to connect SAS drives or backplane-attached storage should look at a different cable.

Highlights

  • Connect RAID or PCIe controllers via SFF-8087
  • Power four SATA drives with 15-pin connectors
  • 29-pin SAS breakout carries data and power
  • Nylon braid bundles four leads for tidy routing
  • Labelled P1–P4 ends simplify installation

Specifications

No published specifications for this item yet.

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the SATA power connectors on the four SFF-8482 breakout ends need replacement over time?

The 15-pin SATA power connectors on each breakout are standard parts; they can be swapped individually if a pin bends or a latch breaks, without replacing the whole 3.3FT assembly.

What is the maximum sustained data rate the SFF-8087 to SFF-8482 cable supports?

The cable is rated for 6Gb transfer rates across each of the four lanes from the 36-pin Mini-SAS host to the 29-pin targets.

Does the nylon-braided bundle add noticeable heat or power draw when the drives run all day?

The braid is passive insulation only; it carries no current and adds no heat, so power draw and temperature stay exactly as the drives and controller dictate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.