We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular video amplifier unit with multiple BNC connectors on front and rear panels

Bluecctv

Bluecctv BL-VA108 Video Amplifier 1 In 8 Out surveillance accessory

SKU CH-9JFT-YM9SD

Distributes one video and stereo audio input to eight outputs with 50 Hz to 5.5 MHz video bandwidth and 10 MHz to 20 MHz audio bandwidth

  • Distributes one video source to eight displays via 1 input and 8 output connectors
  • Maintains signal integrity with 0.8–1.0 Vp-p input and 0.8–1.4 Vp-p output at 75 Ohmic
  • Supports video bandwidth from 50 Hz to 5.5 MHz for clear surveillance footage
  • Handles stereo audio through 1 L+R input and 8 L+R outputs at 2 V RMS
  • Compact 217 × 80 × 40 mm black chassis weighing 540 g with 123 cm cable

Bluecctv BL-VA108 Video Distribution

The Bluecctv BL-VA108 accepts a single composite video source and splits it to eight identical outputs while maintaining 75-ohm impedance. It also provides one stereo audio input and eight stereo audio outputs for parallel sound distribution. Installers use it to feed multiple monitors or recording devices from one camera or DVR channel without signal degradation.

Video bandwidth to 5.5 MHz and audio to 20 MHz

The video path supports 50 Hz to 5.5 MHz, covering standard analogue CCTV resolutions with comfortable headroom for typical surveillance frames. Audio bandwidth spans 10 MHz to 20 MHz, well above the audible range, so stereo feeds remain clean across all eight ports. Very long cable runs or high-definition analogue formats may exceed the available video bandwidth.

One input scaled to eight 75-ohm outputs

The defining specification is the 1-to-8 video split at VS0.8-1.4 Vp-p into 75 ohms per port. If a project requires more than eight display points or needs digital HDMI or SDI interfaces, this unit does not meet that requirement.

Highlights

  • Distributes one video source to eight displays via 1 input and 8 output connectors
  • Maintains signal integrity with 0.8–1.0 Vp-p input and 0.8–1.4 Vp-p output at 75 Ohmic
  • Supports video bandwidth from 50 Hz to 5.5 MHz for clear surveillance footage
  • Handles stereo audio through 1 L+R input and 8 L+R outputs at 2 V RMS
  • Compact 217 × 80 × 40 mm black chassis weighing 540 g with 123 cm cable

Specifications

BrandBluecctv
ModelBL-VA108

Questions about this item

Will the BL-VA108 work with my existing cameras that output VS0.8-1.0Vp-p at 75 Ohmic?

Yes, the amplifier accepts VS0.8-1.0Vp-p at 75 Ohmic input and supports 50Hz-5.5MHz bandwidth, matching those camera signals.

How can I verify the BL-VA108 is amplifying correctly after installation?

Check each of the eight outputs for VS0.8-1.4Vp-p at 75 Ohmic and confirm audio outputs measure 2V RMS at 1KOhmic across 10MHz-20MHz.

Does the BL-VA108 include the 123 cm power cable and all eight BNC video cables in the box?

The unit ships with a 123 cm cable; additional BNC video and RCA audio cables for the eight outputs must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.