We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bluecctv BL-MC100 portable tester with 2.5 inch LCD screen

Bluecctv

Bluecctv BL-MC100 portable tester 2.5" LCD RS232 RS485

SKU CH-Z1JX-A1J3J

Portable surveillance tester with a 2.5 inch LCD, network cable test, RS232 and RS485 support, and a 3.6 V 1200 mAh battery lasting 4-5 hours

  • 5" LCD shows test results clearly on site
  • Tests network cables to verify wiring integrity quickly
  • RS232 and RS485 supported simultaneously for PTZ control
  • 6 V 1200 mAh lithium battery runs 4-5 hours per charge
  • Low power consumption extends field use between charges

Portable CCTV Tester with 2.5" LCD

The Bluecctv BL-MC100 is a handheld tester built for installers who verify analogue cameras on site. It combines a 2.5 inch display with network cable, RS232 and RS485 checks in one unit. The tool suits field engineers who need quick signal confirmation without a separate monitor. It is not for buyers who need IP camera configuration or PoE voltage readings.

Battery Runtime and Signal Handling

A 3.6 V 1200 mAh lithium cell powers the unit for four to five hours of continuous testing. The auto-identify function detects NTSC and PAL signals without manual switching. RS232 and RS485 ports operate simultaneously for PTZ control checks. The device is not for technicians who require all-day uptime without access to a DC9 V charger.

Installation and Common Issues

The on-screen menu uses a simple OSD layout for rapid setup. External power connects via a DC9 V 2 A adapter when the internal pack runs low. Missing the correct barrel plug or reversing RS485 polarity are the typical wiring mistakes. The tester is not for users who expect automatic camera discovery or network diagnostics.

Highlights

  • 5" LCD shows test results clearly on site
  • Tests network cables to verify wiring integrity quickly
  • RS232 and RS485 supported simultaneously for PTZ control
  • 6 V 1200 mAh lithium battery runs 4-5 hours per charge
  • Low power consumption extends field use between charges

Specifications

BrandBluecctv
ModelBL-MC100

Questions about this item

How long does the 3.6 V 1200 mAh battery run the BL-MC100 during continuous testing?

The built-in lithium cell powers the tester for four to five hours per charge.

Which cables or connectors must I already have to use the RS232 and RS485 ports on the BL-MC100?

You need standard RS232 and RS485 cables with the correct pin-outs for your cameras or DVR.

Will the BL-MC100 display video from an older analogue camera using NTSC or PAL?

Yes, the OSD menu auto-identifies both NTSC and PAL signals on the 2.5 inch LCD.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.