We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
16-channel passive video balun in black 1U rackmount chassis with BNC and RJ45 ports

Bluecctv

Bluecctv BL-EV16P-1U 16CH Passive Balun Multi-Transceiver

SKU CH-2HSF-MF08P

A 16-channel passive video balun transceiver for UTP CAT5 cabling with BNC connections and 60 dB common-mode rejection

  • 16-channel passive video transceiver simplifies multi-camera installations
  • Common-mode rejection of 60dB from 15KHz to 6MHz reduces signal interference
  • Works with 24AWG UTP CAT5 or higher cabling for cost-effective wiring
  • 100-ohm UTP to 75-ohm BNC impedance matching ensures signal integrity
  • 1U rack-mount chassis measuring 17 x 3.3 x 1.7 inches fits standard cabinets

16-Channel Passive Video Balun

The Bluecctv BL-EV16P-1U is a 16-channel passive transceiver designed to transmit video signals over unshielded twisted pair cabling. It supports frequency response from DC to 6MHz and provides common-mode rejection of 60dB typical between 15KHz and 6MHz. The unit fits a standard 17-inch rack mount form factor measuring 17 by 3.3 by 1.7 inches and weighs 2.3 pounds.

Upgrading from Single-Channel Baluns

This multi-transceiver replaces up to sixteen individual baluns with a single 1U rack device, reducing patch-panel clutter and installation time. The jump is worth it when deploying or expanding a multi-camera system using 24AWG CAT5 or higher UTP cable with a DC loop resistance of 18 ohms per 100 metres and differential capacitance of 62pF per metre maximum. It matches 100-ohm UTP impedance to 75-ohm BNC coaxial connections without external power.

Suits Installers Building Rack-Based CCTV Systems

This unit suits installers who need to consolidate sixteen video channels into one rack-mount chassis using passive UTP transmission. It is not for buyers who require active signal amplification for longer cable runs, integrated transient protection, or Power over Ethernet functionality for camera power delivery. Systems needing fewer than sixteen channels or wall-mount enclosures should consider alternative form factors.

Highlights

  • 16-channel passive video transceiver simplifies multi-camera installations
  • Common-mode rejection of 60dB from 15KHz to 6MHz reduces signal interference
  • Works with 24AWG UTP CAT5 or higher cabling for cost-effective wiring
  • 100-ohm UTP to 75-ohm BNC impedance matching ensures signal integrity
  • 1U rack-mount chassis measuring 17 x 3.3 x 1.7 inches fits standard cabinets

Specifications

BrandBluecctv
ModelBL-EV16P-1U

Questions about this item

What rack depth and height does the BL-EV16P-1U require for mounting?

The unit measures 17 inches wide, 3.3 inches deep and 1.7 inches high, fitting a standard 1U rack space.

Which cable type and connector should I use for each of the 16 video channels?

Connect 24AWG UTP CAT5 or higher cable to the RJ-45 side; the other end uses BNC connectors matched to 75 ohm coax impedance.

When should I replace the CAT5 links to maintain the specified 60 dB common-mode rejection?

Replace any run where DC loop resistance exceeds 18 ohms per 100 metres or where differential capacitance rises above 62 pF per metre.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.