We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blackmagic Design HyperDeck Studio 4K Pro 1 RU rackmount recorder with front jog shuttle wheel and speaker

Blackmagic Design Pty. Ltd.

Blackmagic Design HyperDeck Studio 4K Pro professional camcorder

SKU CH-V8AT-RTP2J

A 1 RU file-based recorder that captures uncompressed or compressed 10-bit 4:2:2 video in ProRes, DNxHD, H.264 or H.265 onto dual 2.5" SSD and dual SD card slots with 12G-SDI.

  • TypeProfessional Camcorder
  • 1 RU rack design fits standard broadcast bays
  • Uncompressed 10-bit 4:2:2 plus H.264/H.265 capture
  • Dual 2.5" SSD and dual SD card slots for continuous recording
  • 12G-SDI I/O with loop-through plus HDMI 4K connectivity
  • 10G Ethernet plus front speaker and jog/shuttle control

Professional Camcorder Deck

The Blackmagic Design HyperDeck Studio 4K Pro is a 1 RU file-based video recorder built for broadcast and post-production workflows. It replaces traditional tape decks with digital media while keeping familiar jog/shuttle controls. Studios needing reliable ingest and playout of 10-bit 4:2:2 signals will find it a direct fit.

Capacity and Headroom

Two 2.5-inch SSD slots and two SD card slots allow hot-swappable recording so capture continues automatically when one drive fills. Uncompressed 10-bit 4:2:2, ProRes, DNxHD, H.264 and H.265 are all supported, with ProRes 4444 playback for fill and key. The SSD bays handle sustained high-bitrate streams; SD cards provide convenient offload but saturate sooner on heavier codecs.

12G-SDI Connectivity

One 12G-SDI input, two 12G-SDI outputs and a loop-through output carry signals up to DCI 4K alongside an HDMI input and output. Ports autodetect SD, HD, 6G-SDI or 12G-SDI formats. A 10G Ethernet port and USB Type-C output add network and direct-drive ingest options. This I/O set decides whether the deck matches your router and monitor chain.

Highlights

  • 1 RU rack design fits standard broadcast bays
  • Uncompressed 10-bit 4:2:2 plus H.264/H.265 capture
  • Dual 2.5" SSD and dual SD card slots for continuous recording
  • 12G-SDI I/O with loop-through plus HDMI 4K connectivity
  • 10G Ethernet plus front speaker and jog/shuttle control

Specifications

TypeProfessional Camcorder

Questions about this item

Will the 12G-SDI input accept an older 6G-SDI camera feed without extra converters?

Yes, the ports autodetect SD, HD, 6G-SDI and 12G-SDI signals and adjust automatically.

How can I confirm the recorder is capturing 10-bit 4:2:2 video correctly after setup?

Use the front speaker for confidence monitoring and check the front-panel status display for codec, resolution and timecode readouts.

Which media do I need to buy separately to start recording on the two 2.5" SSD slots and two SD card slots?

The deck ships without media; purchase 2.5" SSDs for the SSD bays and UHS-II SD cards for the SD slots to enable hot-swap recording.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.