Black Box Corporation
Black Box LPS535A-SFP Gigabit PoE+ PSE Media Converter network antenna
Media converter delivers up to 30 W PoE+ over copper while linking 10/100/1000 BASE-T to SFP fiber with Link Loss Forwarding
- Powers edge devices up to 30 watts via PoE+
- Auto-negotiation and auto-MDI/MDI-X simplify copper cabling
- Link Loss Forwarding alerts instantly to fiber faults
- SFP port accepts multimode or single-mode 1000BASE-X fiber
- External AC adapter supplies 47 to 57 volt input power
PoE+ Media Converter for Edge Devices
The Black Box LPS535A-SFP acts as power sourcing equipment to deliver up to 30 watts over copper cabling. It transparently connects fiber to copper for PoE+ devices such as PTZ cameras, access points and VoIP phones. Smart plug-and-play installation adds endpoints without network reconfiguration.
Upgrade from Non-PoE Fiber Links
This converter replaces a standard fiber-to-copper link that cannot supply power to remote equipment. The jump is worth it when you need to deploy powered devices beyond the reach of a mains outlet and want a single cable for both data and up to 30 watts. It supports 802.3 af/at compliant endpoints without additional injectors.
Copper and SFP Port Constraints
The copper port operates at 10/100/1000 BASE-T with full-duplex auto-MDI/MDI-X and auto-negotiation. The SFP slot accepts multimode or single-mode 1000BASE-X modules for fiber uplinks. The unit requires an external AC adapter supplying 47 to 57 volts input and includes Link Loss Forwarding plus Link Fault Pass-Through for diagnostics.
Highlights
- Powers edge devices up to 30 watts via PoE+
- Auto-negotiation and auto-MDI/MDI-X simplify copper cabling
- Link Loss Forwarding alerts instantly to fiber faults
- SFP port accepts multimode or single-mode 1000BASE-X fiber
- External AC adapter supplies 47 to 57 volt input power
Specifications
No published specifications for this item yet.
Questions about this item
What type of SFP module and copper cabling does the LPS535A-SFP require?
The SFP port accepts multimode or single-mode 1000BASE-X modules and the copper port uses standard UTP cabling for 10/100/1000-BASE-T connections.
How is the LPS535A-SFP powered and what voltage range must the adapter supply?
The unit is powered by an external AC adapter that must deliver an input voltage between 47 and 57 volts.
Which parts of the LPS535A-SFP will need replacement over time?
The external AC adapter and any SFP transceiver modules are the components most likely to require replacement during the product's service life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
