Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.00086975BTC
In stock
Black Box Corporation
Black Box EVNSL641-0025 CAT6 550MHz network ethernet cable 25 ft
A 25 ft unshielded CAT6 patch cable tested to 550 MHz with snagless boots and gold-plated contacts
- TypeNetwork Ethernet Cables
- Cat6
- Connector ARJ45
- Connector BRJ45
- Length25 ft.
- ColorBlue
- Tested to 550 MHz for headroom above the 250 MHz CAT6 standard
- ETL verified to ANSI/TIA-568-C2 for reliable compliance
- 50-micron gold-plated contacts deliver superior conductivity
- Snagless boots protect connectors from damage during installation
- Rated for 750 insertion cycles for long-term durability
GigaTrue Premium CAT6 patch cable
This 25 ft unshielded twisted-pair cable is tested to 550 MHz, exceeding the 250 MHz CAT6 standard. It uses 24 AWG conductors with 50-micron gold-plated contacts for reliable conductivity. Snagless boots protect the RJ45 connectors during installation and removal. ETL verification confirms compliance with ANSI/TIA-568-C2.
Suited for Gigabit Ethernet and PoE runs up to 25 ft
Ideal for 1000BASE-T, 100BASE-TX and 10BASE-T links where a single blue patch lead is required. The 750-cycle connector rating supports frequent re-patching in rack or wall-plate environments. Not for buyers who need shielded cable for high-EMI areas, outdoor burial rating or lengths beyond 25 ft.
Tested to 550 MHz bandwidth
This single figure shows the cable surpasses the baseline CAT6 requirement by a wide margin, delivering headroom for 1 Gbps signals and reduced near-end crosstalk. If your installation demands verified 550 MHz performance, this part meets it; if you only need the minimum 250 MHz spec, a standard CAT6 cable will also work.
Highlights
- Tested to 550 MHz for headroom above the 250 MHz CAT6 standard
- ETL verified to ANSI/TIA-568-C2 for reliable compliance
- 50-micron gold-plated contacts deliver superior conductivity
- Snagless boots protect connectors from damage during installation
- Rated for 750 insertion cycles for long-term durability
Specifications
| Brand | Black Box |
|---|---|
| Model | EVNSL641-0025 |
| Type | Network Ethernet Cables |
| Cat | 6 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 25 ft. |
| Color | Blue |
| Shielded | Unshielded (UTP) |
| Features | GigaTrue Premium cable constructed to exceed industry standards Cable Tested to 550 MHz, surpassing 250-MHz CAT6 standard Cabling ETL verified to ANSI/TIA-568-C2 50-micron gold-plated contacts provide superior conductivity Connector designed for an insertion and extraction life of 750 cycles This cable offers superior near-end crosstalk (NEXT) compared to standard CAT6 cable Snagless boots prevent connector damage due to snags during installation This cable is ideal for 1000BASE-T, 100BASE-TX, 10BASE-T and other high-speed applications |
| Shipping weight | 0.30 kg |
| Package size | 51 × 51 × 51 mm |
Questions about this item
How do I plug the RJ45 connectors in without breaking the snagless boots?
Hold the boot and push the connector straight in until it clicks; pulling on the cable instead of the boot is the step that tears the snagless tab off.
When will the 50-micron gold-plated contacts need replacement?
The connectors are rated for 750 insertion and extraction cycles, so replacement depends on how often you unplug and reconnect the cable.
What performance limit appears first on a 25 ft run at 550 MHz?
The cable is tested to 550 MHz and ETL verified to ANSI/TIA-568-C2, so the 550 MHz bandwidth ceiling is reached before any length-related signal loss on this 25 ft patch cord.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.00084591BTC
In stock
