We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow singlemode fiber patch cable with SC connectors at both ends, 5 metres long

Black Box Corporation

Black Box Corporation OS2 9/125 Singlemode Fiber Optic Patch Cable OFNR PVC SC to SC Yellow 5m

SKU CH-0PGA-37H24

Singlemode OS2 patch cable with SC/SC connectors, OFNR PVC jacket, 5 m length for Gigabit Ethernet backbones

  • Low insertion loss with .2 dB typical performance
  • High return loss at 55 dB for signal integrity
  • OFNR riser-rated PVC jacket meets fire safety standards
  • Compact SC connectors allow dense patching in tight spaces
  • Singlemode 9/125 µm fiber supports 1310 nm and 1550 nm wavelengths

Singlemode Patch Cable 5 m

The Black Box OS2 9/125 fiber patch cable links singlemode backbones to high-speed network devices such as Gigabit Ethernet switches. It uses SC-to-SC connectors with a ceramic ferrule and a yellow OFNR-rated PVC jacket suitable for riser installations. The 5-metre length supports wavelengths at 1310 nm and 1550 nm.

Installers needing riser-rated singlemode runs

This cable suits technicians building or extending singlemode infrastructure inside vertical shafts where OFNR certification is required. It is not for buyers who need multimode fibre, plenum-rated OFNP jackets, or connector types other than SC.

Check connector polish and panel density

Verify that your patch panels and transceivers accept SC connectors with a push-pull latch and that the 0.2 dB typical insertion loss meets your link budget. Confirm the operating temperature range of 4 to 158 °F covers the installation environment.

Highlights

  • Low insertion loss with .2 dB typical performance
  • High return loss at 55 dB for signal integrity
  • OFNR riser-rated PVC jacket meets fire safety standards
  • Compact SC connectors allow dense patching in tight spaces
  • Singlemode 9/125 µm fiber supports 1310 nm and 1550 nm wavelengths

Specifications

No published specifications for this item yet.

Questions about this item

What network equipment must I already have to use this SC-terminated single-mode patch cable?

You need devices fitted with SC ports that accept 9/125 µm single-mode fibre, such as Gigabit Ethernet switches or backbone patch panels operating at 1310 nm or 1550 nm.

Will this OS2 cable work reliably if I keep older OFNR-rated riser cables in the same pathway?

Yes, the PVC jacket is OFNR certified for riser use, so it meets the same fire-safety rating as existing OFNR cables in the pathway.

How can I verify the link is performing correctly after connecting the 5 m patch lead?

Measure insertion loss with a light source and power meter at 1310 nm or 1550 nm; a result near 0.2 dB and return loss of 55 dB or better confirms proper operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.