We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White M.2 2280 SSD heatsink, 76x25.8x11.5 mm, anodized finish

Bitspower

Bitspower M.2 SSD Armor Advanced White 2280

SKU CH-VWJX-H15D9

White heat sink fits M.2 2280 SSDs, measures 76 by 25.8 by 11.5 mm and installs without tools

  • ColorWhite

Color White

  • Black
  • White
  • Black Sparkle

Struck-through versions exist but are not stocked here.

Model Armor Advanced Version

  • Armor Advanced Version
  • Armor

Struck-through versions exist but are not stocked here.

  • Cools M.2 2280 SSDs with a 76 mm aluminium heatsink
  • Anodised white finish resists corrosion and matches light-themed builds
  • Tool-free clip design lets you fit or remove the armor in seconds
  • Low 11.5 mm height clears most motherboard heatsinks and expansion cards
  • Pre-applied thermal pads transfer heat from both drive sides efficiently

M.2 2280 SSD heat sink for white builds

This white anodised aluminium heat sink fits M.2 2280 solid-state drives and helps lower operating temperatures during sustained workloads. It is aimed at PC builders who want a clean, colour-coordinated look inside a windowed case. The slim profile suits standard motherboard layouts without blocking adjacent slots.

Upgrade from bare-drive operation

When an M.2 drive ships without a substantial cooler, thermal throttling can appear during long writes or heavy gaming sessions. This armour-style sink replaces minimal factory solutions and is worth fitting whenever the drive reaches its throttle point under load. It adds no active noise and requires no extra power.

Handles 76 mm long drives with 11.5 mm total height

The cooler covers the full 2280 form factor and leaves enough clearance for most motherboard heatsink zones. It will not fit drives taller than the stated profile or shorter form factors such as 2230 or 2242. Builders needing multi-drive arrays or extreme overclocking headroom should look at larger active coolers.

Highlights

  • Cools M.2 2280 SSDs with a 76 mm aluminium heatsink
  • Anodised white finish resists corrosion and matches light-themed builds
  • Tool-free clip design lets you fit or remove the armor in seconds
  • Low 11.5 mm height clears most motherboard heatsinks and expansion cards
  • Pre-applied thermal pads transfer heat from both drive sides efficiently

Specifications

ColorWhite

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What are the exact length, width and height measurements of the Bitspower M.2 SSD Armor Advanced White 2280?

The heatsink measures 76 mm long, 25.8 mm wide and 11.5 mm high, so it fits standard M.2 2280 slots without exceeding the typical motherboard keep-out zone.

How do I install the heatsink on my M.2 2280 SSD, and what is the step most people miss?

Remove the protective film from the pre-applied thermal pads, place the SSD between the two halves, then secure the supplied screws evenly; the step often missed is peeling both pad liners before clamping.

Will the thermal pads need replacement, and how can I tell when it is time?

The included thermal pads are designed for long-term use; replace them if they become visibly compressed, cracked, or if SSD temperatures rise noticeably under the same workload.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.