Bitspower
Bitspower BP-WTP-C72 G1/4" Female-Female Extender 20mm Silver Shining
A G1/4" female-to-female extender fitting that adds 20 mm of spacing between components in a custom water-cooling loop
- TypeFittings
- G1/4" threads connect two female ports directly
- 20 mm length adds precise spacing in tight loops
- Brass construction resists corrosion for long service life
- Hidden O-ring seals without visible groove for clean look
- Silver Shining finish matches premium loop aesthetics
Bitspower G1/4" Female-Female Extender
The Bitspower BP-WTP-C72 is a 20 mm long G1/4" female-to-female extender fitting crafted from high-quality brass with a Silver Shining finish. It uses a true hi-flow design and a hidden O-ring to join two male-threaded components securely in a custom water-cooling loop. This rigid connector adds a fixed 20 mm spacing while maintaining unrestricted coolant flow.
For custom-loop builders needing a straight spacer
The fitting suits enthusiasts assembling rigid-tube or soft-tube loops who must bridge a precise 20 mm gap between two G1/4" male ports such as radiator end-tanks, reservoir tops or block terminals. It is not for installers who require adjustable angles, rotary movement or a different thread pitch, and it cannot adapt non-G1/4" hardware without separate adapters.
Brass construction handles continuous loop pressure
Under sustained pump pressure the brass body and concealed O-ring maintain a leak-free seal without deformation, while the hi-flow bore prevents flow restriction during extended gaming or rendering sessions. The Silver Shining coating resists coolant staining and oxidation, so the extender retains its appearance and sealing performance throughout the loop's service life.
Highlights
- G1/4" threads connect two female ports directly
- 20 mm length adds precise spacing in tight loops
- Brass construction resists corrosion for long service life
- Hidden O-ring seals without visible groove for clean look
- Silver Shining finish matches premium loop aesthetics
Specifications
| Brand | Bitspower |
|---|---|
| Model | BP-WTP-C72 |
| Type | Fittings |
Questions about this item
What thread size must my existing fittings or blocks have to connect to this G1/4" female extender?
Both ends use standard G1/4" threads, so any component with a matching G1/4" male fitting will screw directly into this 20 mm extender.
Will the 20 mm length and hidden O-ring design clear the G1/4" ports on my older water blocks without leakage?
The 20 mm length adds minimal spacing, and the concealed O-ring seals against the port face on classic G1/4" blocks just as it does on current models.
How can I confirm the Hi-Flow interior is not restricted after I install the BP-WTP-C72 in my loop?
With the pump running, check that coolant moves freely through the extender and that the silver shining finish shows no seepage at either G1/4" joint.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
