We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver nickel-plated brass adapter, G1/8 to IG1/4 threads, 10 mm inner thread length

Bitspower

Bitspower BP-WTP-C10 G1/8" to IG1/4" Adapter

SKU CH-R48E-1GM4S

Converts a G1/8" thread to an inner G1/4" thread with a 5 mm outer and 10 mm inner thread length

  • Converts G1/8" port to IG1/4" thread for flexible loop design
  • Brass construction with nickel finish resists corrosion and maintains silver shine
  • Hidden O-ring seal prevents leaks without visible sealing rings
  • 5 mm outer and 10 mm inner thread lengths ensure secure component fit
  • RoHS compliant materials meet environmental safety standards for DIY cooling builds

Thread Conversion

This G1/8" to IG1/4" adapter lets custom-loop builders connect components with mismatched port threads. It is intended for high-end water-cooling assemblies where a male G1/8" fitting must join a female G1/4" port. The nickel-plated brass body resists corrosion inside closed coolant circuits.

Thermals And Power

The adapter is a passive brass component that adds no active heat, noise or electrical draw to the loop. Its only thermal role is conducting coolant temperature between the two joined fittings. No fan, pump or power connection is involved.

Build Integration

The male G1/8" thread measures 5 mm long and the female G1/4" thread measures 10 mm deep, so the stack height between connected parts is fixed by those lengths. A concealed O-ring seals the joint without an external gasket. The RoHS-compliant plating satisfies restricted-substance requirements for commercial builds.

Highlights

  • Converts G1/8" port to IG1/4" thread for flexible loop design
  • Brass construction with nickel finish resists corrosion and maintains silver shine
  • Hidden O-ring seal prevents leaks without visible sealing rings
  • 5 mm outer and 10 mm inner thread lengths ensure secure component fit
  • RoHS compliant materials meet environmental safety standards for DIY cooling builds

Specifications

BrandBitspower
ModelBP-WTP-C10

Questions about this item

How do I install the G1/8" to IG1/4" adapter without damaging the O-ring?

Screw the G1/8" male end with 5mm thread length into your component, then thread the IG1/4" female side onto the fitting; the hidden O-ring seals automatically when tightened by hand plus a quarter turn.

What maintenance will the nickel-plated brass adapter need over time?

Wipe the silver shining finish with a soft cloth during loop draining; the nickel plating and brass body resist corrosion so no scheduled replacement is required.

At what point does the 5mm male thread engagement become the limiting factor under sustained pressure?

The 5mm G1/8" male thread reaches its mechanical engagement limit before the 10mm IG1/4" female thread, so torque to spec and pressure-test the loop before long-term use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.