We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bitspower 12mm 90-degree true brass multi-link fitting

Bitspower

Bitspower BP-TBE90DML 12mm 90° fitting

SKU CH-S5RF-VHVM8 MPN BP-TBE90DML

A 90-degree brass coupler joins two 12mm rigid tubes in a dual multi-link layout

  • TypeFittings
  • 90° angle routes tubing cleanly in tight spaces
  • Dual Multi-Link design connects two rigid tubes securely
  • True Hi-Flow interior keeps coolant moving freely
  • Solid brass construction resists corrosion and wear
  • Made exclusively for 12 mm Bitspower Crystal Link tubing

12 mm 90° Dual Multi-Link Adapter

This Bitspower adapter joins two lengths of 12 mm Crystal Link hard tubing at a 90° angle. It is machined from true brass for corrosion resistance and a clean aesthetic. The fitting is designed exclusively for Bitspower rigid tubing.

Replaces separate elbow and coupler fittings

A single piece replaces an elbow plus a straight coupler, reducing potential leak points and shortening the run. The upgrade is worthwhile when a tight 90° turn is needed between two rigid tubes and space for two fittings is not available.

Fits Bitspower Crystal Link hard tubing only

The dual multi-link ports accept 12 mm OD tubing on both ends without additional compression rings. It frees up room inside the loop by combining the turn and the joint in one compact brass body.

Highlights

  • 90° angle routes tubing cleanly in tight spaces
  • Dual Multi-Link design connects two rigid tubes securely
  • True Hi-Flow interior keeps coolant moving freely
  • Solid brass construction resists corrosion and wear
  • Made exclusively for 12 mm Bitspower Crystal Link tubing

Specifications

TypeFittings

Questions about this item

What outer-diameter rigid tubing fits the BP-TBE90DML?

The fitting accepts 12 mm outer-diameter rigid tubing on both ports.

How is the 90° multi-link fitting installed and what step is often missed?

Slide each tube fully into the dual multi-link ports until seated, then tighten both compression rings evenly; skipping the second ring leaves one side loose.

When should the true brass fitting or its seals be replaced?

Replace the fitting if the brass shows corrosion, threads strip, or the internal O-rings leak after re-tightening.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.