We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver adjustable brass link pipe with G1/4 threads, extends 22-31mm

Bitspower

Bitspower BP-DG14AALPI G1/4" Adjustable Link Pipe 22-31mm Silver Shining diy cooling

SKU CH-15QR-BSZ3B MPN BP-DG14AALPI

Adjustable G1/4" brass link pipe spans 22-31 mm for direct GPU-to-GPU water-cooling connections

  • TypeFittings
  • Adjustable 22-31 mm length suits tight GPU spacing
  • G1/4 inch threads connect directly to standard water blocks
  • Brass construction resists corrosion in long-term loops
  • Hidden O-ring design seals without visible compression rings
  • Silver Shining finish matches nickel-plated component aesthetics

G1/4" Adjustable Link Pipe

This Bitspower fitting connects two G1/4" ports in custom water-cooling loops. Its adjustable length suits cross-fire, SLI or direct-connection layouts where rigid tubing would be impractical. The hidden O-ring design maintains a clean seal without visible gaskets. Builders assembling open-loop systems will appreciate the flexibility during installation.

Brass construction and hidden O-ring

The fitting body uses high-quality brass with a Silver Shining finish that resists corrosion in coolant. A concealed O-ring sits inside the thread, so no rubber ring is visible once the fitting is tightened. G1/4" threads match the industry-standard port size found on most water blocks, radiators and reservoirs. The adjustable range lets you bridge gaps without measuring and cutting hard tubing.

Replaces fixed-length rigid connectors

This pipe replaces static link fittings when component spacing varies between builds or when cards are swapped. It is not for builders who need a permanent, non-adjustable joint or who prefer hard-tube aesthetics throughout. The 22-31mm travel covers most multi-GPU slot spacings and direct block-to-block runs. Choose it when the exact port-to-port distance is unknown until final assembly.

Highlights

  • Adjustable 22-31 mm length suits tight GPU spacing
  • G1/4 inch threads connect directly to standard water blocks
  • Brass construction resists corrosion in long-term loops
  • Hidden O-ring design seals without visible compression rings
  • Silver Shining finish matches nickel-plated component aesthetics

Specifications

BrandBitspower
ModelBP-DG14AALPI
TypeFittings

Questions about this item

What does the G1/4" thread standard mean for compatibility with other fittings?

The G1/4" thread is the common standard for custom water-cooling components, allowing this link pipe to connect directly to any matching G1/4" port on blocks, radiators, or reservoirs.

What clearance is required to fit the adjustable length range of 22 to 31 mm?

You need a gap between 22 mm and 31 mm between the two G1/4" ports you are joining; the pipe telescopes to cover any distance within that window.

How is the hidden O-ring seated during installation, and what mistake should be avoided?

Screw each end into its port until the O-ring seats fully, then tighten the locking collar to fix the length; do not over-tighten the collar before both ends are seated, or the seal may not engage.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.