We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black six-foot power cord with NEMA 5-15P plug and C13 connector, 14 AWG jacket

bitmain

bitmain 14 AWG 20 A NEMA 5-15P to C13 power cord 6 ft

SKU CH-VNQ5-QJ8P5

Heavy-duty 14 AWG cord rated 20 A at 110–250 V with NEMA 5-15P to C13 connectors, 6 ft long, UL and CSA listed

  • Length6 ft.
  • 14 AWG gauge supports 20 A continuous load
  • NEMA 5-15P to C13 fits standard wall outlets
  • 6 ft length gives flexible placement
  • UL and CSA listed for safety compliance
  • RoHS compliant materials meet environmental standards

Heavy-duty mining power cord

This 14 AWG NEMA 5-15P to C13 cord is built for high-draw equipment such as Bitmain APW3++ and APW5 power supplies. It carries a 20 A rating at 110-250 V and is UL listed, CSA listed and RoHS compliant for continuous operation.

Suited for mining rigs and high-wattage PSUs

Buyers running standard office PCs or low-power peripherals that ship with lighter cords will not need the extra conductor thickness. Builders who require a different plug type or a shorter cable for tight rack spacing should look elsewhere.

14 AWG gauge decides capacity

The 14 AWG conductor supports the full 20 A load without the overheating risk seen on thinner leads. A plug marking of 10 A is a manufacturing error and does not reflect the cord's certified rating.

Highlights

  • 14 AWG gauge supports 20 A continuous load
  • NEMA 5-15P to C13 fits standard wall outlets
  • 6 ft length gives flexible placement
  • UL and CSA listed for safety compliance
  • RoHS compliant materials meet environmental standards

Specifications

Length6 ft.

Questions about this item

Will the 14 AWG 20 A cord safely power my older ATX gaming PSU that uses a C13 inlet?

Yes, the cord is rated 14 AWG, 20 A, 110-250 V and carries UL, CSA and RoHS listings, so it meets the inlet requirements of standard ATX power supplies.

How can I verify the cord is delivering full current to my Bitmain APW3++ after installation?

Check that the NEMA 5-15P plug seats firmly in the wall outlet and the IEC C13 connector locks onto the PSU inlet; the PSU should power on without tripping the circuit breaker.

Does the 6 ft cable include both the NEMA 5-15P plug and the C13 connector, or must I buy one separately?

The cord ships as a single assembled unit with a 3-prong male NEMA 5-15P on one end and a 3-prong female IEC C13 on the other; no extra parts are needed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.