We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 6ft BNC male-to-male cables with gold-plated connectors, black PVC jacket, coiled together

Bipra

Bipra 12G SDI BNC Cable 6ft Belden 1694A 2-Pack

SKU CH-272A-86N84

Two 6 ft Belden 1694A coaxial cables with gold-plated BNC connectors carry 12G-SDI signals at 11.88 Gbps for professional video

  • Supports 12G-SDI at 11.88 Gbps for 4K/8K video
  • Gold-plated BNC connectors ensure reliable 75 Ohm signal integrity
  • Belden 1694A coax with 4.5 GHz bandwidth minimises attenuation
  • Dual shielding: 95% braid plus 101% Duofoil blocks interference
  • 6 ft length suits studio and on-location SDI patching

Professional SDI Cable 12G 6ft

This Bipra two-pack supplies 6 ft Belden 1694A coaxial cables with gold-plated BNC male connectors on each end. The 75 Ohm, 18 AWG construction uses a solid bare copper centre conductor, gas-injected foam polyethylene dielectric and a combined 95 % tinned copper braid with Duofoil shield for 101 % coverage. Each cable is rated for 4.5 GHz bandwidth and exceptionally low attenuation. The pair is ready for rack or field installation.

Broadcast and post-production engineers

Suits camera operators, video engineers and facility installers who need reliable 12G-SDI links for 4K and 8K workflows. Also covers legacy SD-SDI, HD-SDI, 3G-SDI and 6G-SDI formats plus MADI, word clock and sync signals. Not for users who require fibre or IP transport, nor for runs that exceed the reach of copper coax without re-clocking.

12G-SDI 11.88 Gbps support

The decisive specification is compliance with SMPTE ST 2083 at 11.88 Gbps, enabling a single-cable 12G-SDI path for 4K and 8K video. The same assemblies also meet ST 2081 (6G), ST 424 (3G), ST 292 (HD) and ST 259 (SD) standards.

Highlights

  • Supports 12G-SDI at 11.88 Gbps for 4K/8K video
  • Gold-plated BNC connectors ensure reliable 75 Ohm signal integrity
  • Belden 1694A coax with 4.5 GHz bandwidth minimises attenuation
  • Dual shielding: 95% braid plus 101% Duofoil blocks interference
  • 6 ft length suits studio and on-location SDI patching

Specifications

No published specifications for this item yet.

Questions about this item

What connector type and impedance do the BNC plugs on this 6ft Belden 1694A cable use?

The cable has gold-plated BNC male connectors at each end and is built to a 75 Ohm impedance for SDI video signals.

How do you attach the BNC connectors on this cable, and what common mistake should be avoided?

Push each BNC male plug straight onto the device's BNC female jack, then turn the knurled collar clockwise until it locks; the mistake is leaving the collar loose, which breaks the 75 Ohm path and causes signal loss.

When should the Belden 1694A cable be replaced, and what wear signs indicate it?

Replace the cable if the PVC jacket is cracked, the braid is exposed, the gold pins are bent or corroded, or intermittent picture drop-outs appear during 12G-SDI use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.