BFKK PSU Cable Extension Kit White 24Pin ATX 8Pin EPS 2x 8Pin PCI-E 30cm 16AWG

All-white cable extension kit for custom builds

The BFKK extension kit adds 30 cm of length to stock power-supply cables and uses a glossy white nylon braid for a clean, uniform look inside white-themed chassis. It includes one 24-pin ATX cable, one 4+4-pin EPS cable and two 6+2-pin PCI-E cables, plus pre-installed transparent cable combs and an extra set of white combs for custom routing. The kit targets builders who want a cohesive aesthetic without replacing the original PSU cables.

16 AWG copper core limits current to high-wattage

The cables use a 16 AWG thickened alloy copper core rated for power supplies between 800 W and 1600 W, so they are not suitable for lower-wattage or server-grade units outside that range. Gold-plated terminals reduce resistance and heating, but the extension adds 30 cm of conductor, which increases voltage drop slightly compared with a direct connection. Builders running extreme overclocks on the highest-end GPUs should verify that the added length does not push the PSU sense lines out of spec.

Pre-installed combs and spare set simplify daily

Transparent combs ship already fitted on every cable, keeping wires aligned during the first build and reducing the time spent aligning sleeves behind the motherboard tray. The spare white combs — three for the 24-pin and nine for the 8-pin connectors — allow re-combing after final cable placement without buying extra accessories. The all-white braid shows dust more readily than dark sleeves, so periodic cleaning is needed to maintain the premium appearance in windowed cases.