We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Crimping tool kit with spade connectors and assorted terminals

BFKK

BFKK Open Terminal Connector Crimping Tool Kit network ethernet cable

SKU CH-TMS2-AHTJV

Crimps 24-14 AWG open-barrel terminals with ratchet precision and includes assorted spade and splice connectors

  • Crimps 24-14 AWG open-barrel terminals with automatic ratchet precision
  • Three jaw sizes cover 2.8-6.3 mm pitch connectors from Molex and TE
  • Tin-plated copper spade terminals ensure reliable conductivity and corrosion resistance
  • Kit includes splice, ring, and .110/.187/.250 in male-female quick-disconnect pairs
  • Suitable for automotive, marine, appliance and DIY electronics wiring

Open Terminal Crimping Kit

The BFKK crimping tool kit equips technicians and DIY builders with a ratchet crimper and a mixed assortment of non-insulated spade terminals. It covers 24 to 14 AWG wire and handles open-barrel contacts from Molex .093, MX150, MLX and AMP Mate-n-Lok or FASTON families. The kit suits automotive, marine, appliance and hobby-electronics wiring jobs.

Capacity and headroom

Three interchangeable jaw sets crimp 2.8, 3.5, 3.9, 4.8 and 6.3 mm pitch terminals, while the adjustable ratchet locks at the correct pressure for each size. The tool stops at 14 AWG upper limit and does not accept insulated barrels or larger gauge cable. Very fine wire below 24 AWG falls outside the calibrated range.

Tin-plated copper terminals

Included male and female spade connectors in .110, .187 and .250 inch widths are stamped from tin-plated red copper for corrosion-resistant conductivity. The pack also supplies non-insulated splice and ring terminals, letting you build or repair quick-disconnect harnesses without sourcing separate parts.

Highlights

  • Crimps 24-14 AWG open-barrel terminals with automatic ratchet precision
  • Three jaw sizes cover 2.8-6.3 mm pitch connectors from Molex and TE
  • Tin-plated copper spade terminals ensure reliable conductivity and corrosion resistance
  • Kit includes splice, ring, and .110/.187/.250 in male-female quick-disconnect pairs
  • Suitable for automotive, marine, appliance and DIY electronics wiring

Specifications

No published specifications for this item yet.

Questions about this item

Will the ratchet mechanism on this crimper still engage cleanly if I keep using my older 24 AWG wire spools?

The tool adjusts automatically for 24-14 AWG non-insulated open barrels, so your existing 24 AWG spools fall within the calibrated range.

How can I verify the three jaw sizes are aligned correctly after I mount the tool on my bench?

Each jaw is sized for 2.8mm, 3.5mm, 3.9mm, 4.8mm and 6.3mm pitch terminals; a correct crimp seats fully without wire strand deformation.

Which terminal sizes are supplied in the kit and what must I source separately for a 0.187" spade project?

The box includes 0.110", 0.187" and 0.250" male-female spades plus non-insulated splices and rings; no extra parts are needed for 0.187" work.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.