We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Slim metal PDU with two US outlets and dual Ethernet ports

BFKK

BFKK IP9828 2-Port Web PDU AutoPING 15A 90-240VAC

SKU CH-M101-QMEQ8

Two-outlet web-controlled PDU with AutoPING monitoring, 15 A total capacity and 90-240 VAC input in a 3.5 cm metal chassis

  • Web-controlled PDU with AutoPING for automated power cycling
  • Slim 35 mm metal chassis fits tight rack spaces
  • Dual 10/100 Ethernet ports enable WAN and LAN access
  • Current sensing on both outlets monitors load in real time
  • 15 A rating at 90-120 VAC supports high-power equipment

Compact web-controlled PDU for tight spaces

The BFKK IP9828 is a two-outlet power distribution unit built in a slim metal enclosure only 35 mm high. It suits server cabinets or wall mounts where vertical clearance is limited and remote power cycling is required.

Bundled cords and DIN-rail option change

Two 12-inch IEC C14 to NEMA 5-15R output cords are included so North-American devices can be connected immediately. The input power cord is not supplied. DIN-rail mounting hardware is available separately for industrial rail installations.

Verify voltage, current and network before ordering

The unit accepts 90 to 240 VAC but total load is capped at 15 A on 90-120 VAC and 10 A on 210-240 VAC. Confirm your equipment stays within those limits. A wired 10/100 Ethernet connection is needed for web, SNMP, MQTT or SSH control.

Highlights

  • Web-controlled PDU with AutoPING for automated power cycling
  • Slim 35 mm metal chassis fits tight rack spaces
  • Dual 10/100 Ethernet ports enable WAN and LAN access
  • Current sensing on both outlets monitors load in real time
  • 15 A rating at 90-120 VAC supports high-power equipment

Specifications

No published specifications for this item yet.

Questions about this item

Will the latching relays or current sensors need periodic replacement?

The magnetic latching relays are solid-state with no moving contacts, so they do not wear out mechanically. The built-in current sensors on both ports are integrated into the control board and have no user-serviceable parts.

What limits total load before the unit trips?

The unit enforces a hard 15 A limit at 90-120 VAC and 10 A at 210-240 VAC; exceeding either threshold triggers the internal surge protection and shuts down the affected ports.

How much heat does the metal enclosure dissipate when both ports run continuously at 15 A?

The 195 × 88 × 35 mm steel chassis acts as a passive heatsink; with a maximum total loading of 15 A at 120 V the enclosure surface stays warm but within safe touch temperature without any fan.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.