BFKK
BFKK Dual Band 2.4/5.8 GHz 8 dBi Omnidirectional Network Antenna with 3 m KMR195 Cable
Dual-band omnidirectional antenna delivers 8 dBi gain across 2.4 GHz and 5.8 GHz with a 3 m low-loss cable for extended outdoor Wi-Fi links
- Dual-band 2.4 GHz and 5.8 GHz coverage for wide compatibility
- 8 dBi gain extends wireless range significantly
- Omnidirectional pattern receives signals from every direction
- 3 m low-loss KMR195 cable minimises signal attenuation
- Weatherproof fiberglass housing operates from -20 °C to +80 °C
Dual-band Wi-Fi antenna for long-range links
This 8 dBi omnidirectional antenna operates on both 2.4 GHz and 5.8 GHz bands to extend wireless coverage. It suits homes, warehouses, campgrounds, RVs, boats and remote IP cameras where the stock router signal cannot reach. The waterproof fibreglass housing withstands outdoor conditions from -20 °C to +80 °C.
Simple pole-mount with included hardware
The kit supplies a glass-fibre antenna, a mount kit, a 3 m KMR195 cable with N-Male to RP-SMA Male ends and an RP-SMA Female to SMA Male adapter. Connect the N-Female antenna base to the cable, attach the adapter if your device uses SMA, and secure the assembly to a mast or wall. Mis-threading the N-type or RP-SMA connectors is the most common installation error.
Verify connector gender and cable routing first
Check that your router, hotspot or camera presents an RP-SMA or SMA port matching the supplied adapter. Ensure the 3 m cable run can reach the mounting location without sharp bends that would degrade the low-loss KMR195 line. Confirm the operating band of your equipment falls within 2400–2485 MHz or 5150–5850 MHz.
Highlights
- Dual-band 2.4 GHz and 5.8 GHz coverage for wide compatibility
- 8 dBi gain extends wireless range significantly
- Omnidirectional pattern receives signals from every direction
- 3 m low-loss KMR195 cable minimises signal attenuation
- Weatherproof fiberglass housing operates from -20 °C to +80 °C
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the 8 dBi omnidirectional antenna is performing correctly after installation?
Check that your router or hotspot reports stronger received-signal levels on both the 2.4 GHz (2400 - 2485 MHz) and 5.8 GHz (5150 - 5850 MHz) bands and that link stability improves at distance.
What comes in the box and which items must be purchased separately?
The package includes the fiberglass antenna, a mount kit, the 3 m KMR195 cable with N-Male to RP-SMA Male ends, and an RP-SMA Female to SMA Male adapter; no extra parts are required for basic installation.
Should I choose the version with the 3 m KMR195 cable or a different cable length for my setup?
Only the 3 m KMR195 cable version is listed; select it when the 3 metre reach matches the distance between your antenna mounting point and the device connector.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
