We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twenty-four slim Cat8 patch cables, half-foot length, gold-plated connectors

BFKK

BFKK Cat8 Ethernet Cable 0.5 ft 24 Pack Slim

SKU CH-3N8M-98HBH

Slim 0.5 ft Cat8 patch cables, 24-pack, 40 Gbps, 2000 MHz, 30 AWG pure copper, double F/FTP shielding, Fluke DSX-8000 tested, ANSI/TIA 568.2-D compliant

  • Length0.5 ft.
  • Supports 40 Gbps speeds with 2000 MHz bandwidth
  • 24 cables per pack for consistent high-density deployments
  • Slim 30 AWG design fits tight racks and small spaces
  • Double F/FTP shielding blocks EMI and RFI interference
  • Pure copper conductors tested to Fluke DSX-8000 standard

BFKK Cat8 Cable 24 Pack 0.5 ft

The BFKK Cat8 Ethernet cable pack contains twenty-four slim patch cords, each 0.5 ft long, designed for high-density networking in server rooms and data centres. Pure copper 30 AWG conductors and double F/FTP shielding deliver 40 Gbps transfer speeds at up to 2000 MHz bandwidth. Cables comply with ANSI/TIA 568.2-D standards and pass Fluke DSX-8000 testing.

Suited for short patch-panel uplinks.

Builders wiring switch-to-switch, switch-to-router or switch-to-server links inside a rack benefit from the slim profile and snagless connectors. The 0.5 ft length is too short for desk-to-wall or cross-room connections, so installers needing metre-scale drops should select a different cable length.

0.5 ft length decides rack-density fit

The half-foot measurement is the single specification that determines whether the cables fit tight rack spacing without slack. If the patch-panel-to-switch distance exceeds this length, the cords will not reach and a longer Cat8 patch cable is required.

Highlights

  • Supports 40 Gbps speeds with 2000 MHz bandwidth
  • 24 cables per pack for consistent high-density deployments
  • Slim 30 AWG design fits tight racks and small spaces
  • Double F/FTP shielding blocks EMI and RFI interference
  • Pure copper conductors tested to Fluke DSX-8000 standard

Specifications

Length0.5 ft.

Questions about this item

Will the 30 AWG conductors in this 0.5 ft cable need replacement sooner than thicker cables?

The 30 AWG pure copper conductors meet Fluke DSX-8000 project standards and ANSI/TIA 568.2-D, so they are rated for the same installed life as standard-gauge Cat8 when used within spec.

What limits throughput first when these cables run 40 Gbps continuously in a 24-pack bundle?

Each cable supports 40 Gbps and 2000 MHz bandwidth; the practical limit will be the connected switch or NIC port speed, not the cable itself.

Does the double F/FTP shielding on these slim cables reduce heat build-up in a packed rack?

The foil and individually shielded pairs block EMI/RFI rather than dissipate heat; the slim 30 AWG design improves airflow, which helps keep temperatures lower in dense installations.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.