We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

BFKK

BFKK Cat6a Slim Ethernet Patch Cable 1 ft 24 Pack Yellow

SKU CH-AQE3-NAH82

Slim Cat6a patch cables in a 24-pack deliver 10 Gbps over 1 ft runs with 28 AWG copper that is over 50% thinner than standard cords for high-density racks

  • Length1 ft.
  • Supports 10 Gbps data rates for high-speed networking
  • 28 AWG stranded copper construction ensures reliable signal transmission
  • Over 50 % thinner than standard cables for tight-space routing
  • Snagless plugs with clear boots simplify connection and PoE port visibility
  • Rated for PoE 30 W and 60 W with 12-cable bundle limit

High-density 24-pack for data centres

This 24-pack of Cat6a slim patch cables delivers 1 ft yellow leads for high-density rack installations. The thin 28 AWG construction is over 50 percent narrower than standard Cat 6 cords, improving airflow and easing cable management in crowded cabinets. Each cable uses stranded bare copper and meets Fluke-tested performance for 10 Gbps links.

28 AWG stranded copper with 15-metre channel limit

The single specification that decides fit is the 28 AWG conductor gauge, which restricts the maximum channel length to 15 metres. These 1 ft leads are therefore intended for short cross-connects between patch panels, switches or a modem and router, not for long horizontal runs. Exceeding the length limit will invalidate the 10 Gbps rating.

Sustained PoE loads with 12-cable bundle cap

Under continuous load the cables support PoE at 30 watt and 60 watt levels provided no more than 12 cables are bundled together. The snagless clear boots allow visual confirmation of port LEDs while the strain-relief design maintains connector integrity during repeated mating cycles. ANSI TIA 568.2 D compliance is maintained throughout extended operation.

Highlights

  • Supports 10 Gbps data rates for high-speed networking
  • 28 AWG stranded copper construction ensures reliable signal transmission
  • Over 50 % thinner than standard cables for tight-space routing
  • Snagless plugs with clear boots simplify connection and PoE port visibility
  • Rated for PoE 30 W and 60 W with 12-cable bundle limit

Specifications

Length1 ft.

Questions about this item

What does the 10 Gbps rating mean when the cable is installed in a rack?

The cable supports up to 10 Gbps data rates in short runs, making it suitable for high-density patch-panel connections where space and airflow are limited.

Which standard does the Cat6a cable meet and what does that cap in practice?

It exceeds the ANSI TIA 568.2 D standard, ensuring reliable 10 Gbps performance over the 1 ft length without signal degradation.

How much space do the 28 AWG slim cables save compared with standard Cat6 patch cords?

They are over 50 % thinner, allowing tighter routing, better rack airflow and up to 12 cables per bundle for PoE 30 W or 60 W applications.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.