We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fifty slim Cat6a patch cables, 2 ft each, gold-plated connectors

BFKK

BFKK Cat6a 2 ft 10G 550 MHz 30AWG Slim 50 Pack network ethernet cable

SKU CH-R4T9-ZZNGJ

A 50-pack of slim 2 ft Cat6a cables with 30 AWG conductors rated for 10 Gbps at 550 MHz

  • Length2 ft.
  • Half the diameter of standard cables for high-density routing
  • 50 slim cables fit in tight racks saving pathway costs
  • 30 AWG pure copper with gold-plated contacts for reliable 10G links
  • 550 MHz bandwidth supports full 10G Ethernet performance
  • 2 ft length ideal for patch-panel-to-switch connections

2 ft Cat6a 10G patch cables for high-density racks

This 50-pack of Cat6a patch cables measures 2 ft each and is rated for 10G speeds at 550 MHz. The 30AWG slim profile reduces the diameter to roughly half that of a standard patch cable, allowing three cables to occupy the space of one. Gold-plated 8P8C contacts are fitted on both ends.

Slim diameter triples cable density in patch panels

The reduced thickness lets you route many more links through existing pathways without expanding cable trays or raceways. Shorter 2 ft lengths keep slack to a minimum when connecting a patch panel directly to a switch. Snagless boots protect the latch during frequent moves in dense telecommunications rooms.

Check port spacing and cable management before

Verify that your patch-panel ports and switch ports accept the tighter bend radius of a 30AWG cable without blocking adjacent jacks. Ensure the 2 ft reach matches the distance between your panel and switch so there is no excess length to manage. Confirm that your installation standards allow the smaller conductor gauge for 10G runs.

Highlights

  • Half the diameter of standard cables for high-density routing
  • 50 slim cables fit in tight racks saving pathway costs
  • 30 AWG pure copper with gold-plated contacts for reliable 10G links
  • 550 MHz bandwidth supports full 10G Ethernet performance
  • 2 ft length ideal for patch-panel-to-switch connections

Specifications

Length2 ft.

Questions about this item

Will the 30 AWG copper conductors need replacing sooner than thicker cables?

The 30 AWG pure copper conductors are gold plated for reliable contact; physical wear from repeated plugging is the main factor that could eventually require replacement.

Does the 2 ft length limit 10 Gbps performance in a 550 MHz channel?

The 2 ft length is well within Cat6a distance limits, so the 10 Gbps / 550 MHz rating is fully supported at this length.

Do the slim 30 AWG cables run hotter when carrying 10 Gbps all day?

Ethernet signalling at 10 Gbps uses very low current, so the slim 30 AWG conductors do not generate noticeable heat during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.