We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twenty-four blue Cat6 patch cables, one foot each, gold-plated connectors, molded strain relief

BFKK

BFKK Cat6 10G Ethernet Cable 1 ft Blue 24 Pack

SKU CH-936E-HZZ9G

A 24-pack of 1 ft blue Cat6 patch cables with gold-plated 8P8C connectors, 26AWG stranded copper and moulded strain relief for 10 Gbps links up to 550 MHz

  • Length1 ft.
  • ColorBlue
  • Ready-to-use 1 ft cables eliminate cutting and crimping time
  • Gold-plated 8P8C contacts support up to 10 Gbps at 550 MHz
  • Short uniform length simplifies patch-panel-to-switch cable management
  • 26 AWG stranded pure copper construction meets TIA/EIA 568-C.2 Category 6 standard
  • 24-pack provides consistent colour and length for high-density installations

Ready-to-use patch cables for dense installs

This 24-pack supplies pre-terminated CAT6 patch cables, each one foot long, eliminating the labour of cutting and crimping custom lengths. The short blue cords are intended for patch-panel-to-switch runs and similar high-density connections where uniform length and colour simplify cable management. Installers who need bulk, consistent jumpers for rack or cabinet work will find the pack convenient. Builders who require longer runs or mixed lengths should look elsewhere.

Gold-plated contacts and stranded copper

All eight positions on each RJ45 plug are gold plated to maintain reliable contact up to 10G speeds at 550 MHz. The conductors are 26 AWG stranded pure copper, providing flexibility for tight routing while meeting the TIA/EIA 568-C.2 Category 6 performance baseline. Fully moulded strain relief and a protected release clip reduce wear from repeated insertion and removal. No active cooling or power draw is involved, so thermals and noise are non-factors.

Replaces hand-made jumpers and older Cat5 cords

These factory-terminated cables replace the time-consuming practice of field-terminating patch cords and supersede Category 5 links that cannot guarantee 10G throughput. The upgrade is worthwhile when a rack or cabinet demands many identical short links with verified performance to 550 MHz. If the installation calls for longer distances, solid-core cable, or a different category rating, this pack does not address those needs.

Highlights

  • Ready-to-use 1 ft cables eliminate cutting and crimping time
  • Gold-plated 8P8C contacts support up to 10 Gbps at 550 MHz
  • Short uniform length simplifies patch-panel-to-switch cable management
  • 26 AWG stranded pure copper construction meets TIA/EIA 568-C.2 Category 6 standard
  • 24-pack provides consistent colour and length for high-density installations

Specifications

Length1 ft.
ColorBlue

Questions about this item

How do I install these 1 ft cables into a patch panel without damaging the gold-plated connectors?

Push each RJ45 plug straight into the patch-panel port until the clip clicks; the fully moulded strain relief and clip protector stop the latch from snapping off during insertion or removal.

What part of these 26 AWG stranded copper cables will need replacement first in a busy rack?

The clip protector on the RJ45 plug wears out with repeated unplugging; the stranded conductors and gold-plated contacts are rated for the cable's full service life.

At what point does the 550 MHz bandwidth limit show up during sustained 10 Gbps traffic?

The cable meets the TIA/EIA 568-C.2 Category 6 standard, so the 550 MHz bandwidth ceiling only appears on runs longer than the 1 ft length supplied.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.