BFKK Cat 8 Network Ethernet Cable 60 ft 26AWG 2000MHz 40Gbps

Cat 8 60 ft 2000MHz 40Gbps cable

This Cat 8 Ethernet cable runs 60 ft and supports bandwidth up to 2000MHz with data rates up to 40Gbps. The 26AWG shielded twisted-pair construction uses 100% oxygen-free copper and dual shielding to minimise interference. It is rated for indoor and outdoor use, including direct burial, with a UV-resistant PVC jacket that withstands sun, cold, heat and humidity. Gold-plated RJ45 connectors provide broad compatibility with routers, switches, consoles, NAS, IP cameras, smart-home hubs and other RJ45 devices.

Plug-and-play RJ45 with backward compatibility

Each end terminates in a shielded RJ45 connector that clicks into any standard port without tools or drivers. The cable is backward compatible with Cat5, Cat5e, Cat6, Cat6a and Cat7 equipment, so it drops into existing networks immediately. The thicker 26AWG conductors are stiffer than 32AWG alternatives; allow a generous bend radius and avoid sharp kinks during routing to prevent conductor damage. Secure the cable along walls or conduit with ties rather than staples to preserve the shielding integrity.

Verify port speed and routing path before ordering

Confirm that your router, switch or device ports support multi-gigabit operation to benefit from the 40Gbps rating; legacy 1GbE ports will limit throughput to 1Gbps. Measure the exact run length including vertical drops and service loops so the 60 ft length covers the path without tension. For outdoor or buried sections, check local regulations on burial depth and whether conduit is required. Ensure both ends have accessible RJ45 jacks and that the jacket can enter the building through a weather-sealed opening.