We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
One hundred black Cat 6 patch cables, each two feet long with snagless RJ45 connectors

BFKK

BFKK Cat 6 network ethernet cable 100-pack 2 feet black

SKU CH-C91J-3J41C

A 100-pack of Cat 6 patch cables, each two feet long with snagless RJ45 connectors and gold-plated contacts for gigabit and 10-gigabit networks

  • Snagless boots protect RJ45 tabs from damage during dense patching
  • Cat 6 ANSI/TIA-568-C.2 compliant and ETL verified for reliable gigabit links
  • 24 AWG stranded conductors with spline reduce crosstalk for stable throughput
  • 50 micron gold-plated contacts resist corrosion and maintain signal integrity
  • 100 cables at 2 feet each simplify colour-coded 48-port switch deployments

Bulk Cat 6 cable for dense patching

This 100-pack supplies 2-foot Cat 6 patch cords terminated with RJ45 connectors for high-density rack work. Each cable meets ANSI/TIA-568-C.2 and carries ETL verification for reliable gigabit and 10-gigabit links. The black jacket aids visual identification in crowded 48-port panels. Buyers needing longer runs or different colour coding should look elsewhere.

Snagless boots and splined UTP construction

Moulded snagless strain-relief boots protect the latch during frequent re-patching in tight cabinets. Inside, 24 AWG stranded conductors are twisted in pairs and separated by a spline to suppress crosstalk. Fifty-micron gold-plated contacts resist corrosion while maintaining low-resistance connections across repeated mating cycles.

Rated for 10GBASE-T up to the standard distance

The cables support 10BASE-T, 100BASE-TX, 1000BASE-T and 10GBASE-T signalling, plus PoE delivery through all four pairs. Performance holds across sustained 10-gigabit traffic within the channel limits defined by the Cat 6 standard. Installations requiring certified Cat 6A or Cat 7 performance for longer 10-gigabit reaches will need a higher-category solution.

Highlights

  • Snagless boots protect RJ45 tabs from damage during dense patching
  • Cat 6 ANSI/TIA-568-C.2 compliant and ETL verified for reliable gigabit links
  • 24 AWG stranded conductors with spline reduce crosstalk for stable throughput
  • 50 micron gold-plated contacts resist corrosion and maintain signal integrity
  • 100 cables at 2 feet each simplify colour-coded 48-port switch deployments

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 24 AWG stranded Cat 6 cable without damaging the 50 micron gold-plated contacts?

Route the 2-foot patch cord gently, keep bends wider than the cable diameter, and press each RJ45 plug straight into the port until the snagless boot clicks — never force the latch or twist the connector.

What maintenance or replacement will the 100-pack of Cat 6 cables need over time?

Inspect the molded strain-relief boots and gold-plated contacts periodically; replace any cable that shows cracked boots, bent latches or corroded pins to maintain Gigabit and 10-Gigabit performance.

What limit appears first on a 2-foot Cat 6 run when a 48-port PoE switch pushes sustained 10 Gbps traffic?

The 24 AWG stranded conductors and ANSI/TIA-568-C.2 channel budget cap the run at 10 Gbps up to 45 metres, so the 2-foot length stays well within spec; heat from PoE on 48 ports is the practical ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Network Ethernet Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.