We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 9U open-frame 19 inch server rack on casters with adjustable depth rails

BFKK

BFKK 9U 19" Adjustable Depth Server Rack 24-38" Black

SKU CH-C634-5EH0Q

A 9U 19-inch open-frame rack with adjustable 24-to-38-inch depth, 2.0 mm steel construction, 1700 lb caster rating and 1200 lb leveling-foot capacity

  • TypeRack Enclosure
  • Adjustable 24–38 inch depth fits diverse 19" gear
  • 0 mm cold-rolled steel frame handles 1700 lbs static load
  • Three 3" casters tested 1.85 miles at 1200 lbs
  • Leveling feet add 1200 lb stability on uneven floors
  • Horizontal rails boost rigidity and spread equipment weight evenly

9U 19" Adjustable-Depth Server Rack

This 9U open-frame rack accepts standard 19-inch equipment and lets you set the mounting depth between 24 and 38 inches (60 to 95 cm). It is built for home labs, test environments, small data-centre rows or home-theatre installations where a full cabinet is unnecessary. The four-post, all-rivet construction uses 2.0 mm cold-rolled steel finished with anti-rust powder coating.

Upgrade from fixed-depth or wall-mount racks

Fixed-depth racks force you to choose between shallow switches and deep servers; this unit slides to match whatever gear you add later. Wall-mount brackets cannot handle the 1 700 lb static rating on casters or 1 200 lb on levelling feet. The jump is worth it when you need floor-standing mobility plus the option to reconfigure depth without buying a new frame.

Straightforward assembly with riveted frame

The rack ships double-boxed with clear instructions and all hardware; the nut-less, all-rivet frame bolts together with basic tools. Three 3-inch heavy-duty casters (tested to 1.85 miles under 1 200 lb load) and levelling feet install in minutes. The most common issue is aligning the adjustable L-rails during first build — take time to square the frame before tightening every rivet joint.

Highlights

  • Adjustable 24–38 inch depth fits diverse 19" gear
  • 0 mm cold-rolled steel frame handles 1700 lbs static load
  • Three 3" casters tested 1.85 miles at 1200 lbs
  • Leveling feet add 1200 lb stability on uneven floors
  • Horizontal rails boost rigidity and spread equipment weight evenly

Specifications

TypeRack Enclosure

Questions about this item

What is the adjustable mounting depth range of the 19-inch rack?

The top and bottom frames slide to set the mounting depth anywhere from 24 to 38 inches (60 to 95 cm), fitting a wide variety of 19-inch standard networking equipment.

How are the L-rails installed and what step is often missed?

Bolt the L-rails to the four riveted posts using the supplied hardware; the step many people skip is fitting the rails even when no equipment is mounted yet, because they act as extra structural bracing for the whole frame.

What ongoing checks do the casters and leveling feet need?

Periodically verify that the three 3-inch heavy-duty casters roll freely and that their locks engage fully, and confirm the leveling feet remain tight against the floor so the rack stays stable under its 1,700 lb static-load rating.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.