BFKK
BFKK 850 GPH Pool Cover Pump Red
Submersible pump removes water at 850 GPH, includes 20 ft hose, 25 ft cord and four adapters for pools, ponds and tubs
- Drains pool covers fast with 850 GPH flow rate
- 25 FT power cord reaches distant outlets without extensions
- 20 FT kink-resistant hose cuts waiting time during drainage
- IPX8 waterproof build with overheat shut-off at 55° protects motor
- 360° low-profile base lowers water to 0.4" and resists tipping
Pool Cover Pump with 850 GPH Flow
This submersible pump removes water from pool covers, ponds, hot tubs and sumps. It delivers a maximum discharge rate of 850 GPH and can push water to a height of 10.5 feet. The unit is rated IPX8 for waterproof durability and rust resistance. It is designed for above-ground drainage tasks where a portable electric pump is needed.
Setup With 25 FT Cord and Four Adapters
The pump ships with a 25 FT power cord, a 20 FT flexible drain hose, two hose clamps, a filter bag and four hose adapters sized at 1/2, 3/4, 1 and 3/4 inch brass. Brass adapters connect to standard 3/4 GHT garden hose but may not thread fully, which is normal. Overheating protection shuts the motor off automatically when internal temperature exceeds 55 degrees. The unit lacks an automatic power-off sensor, so the user must unplug it manually once draining is complete.
360 Degree Intake Lowers Water to Point Four Inches
A wide base and slim profile allow 360 degree water intake, reducing the residual water level to less than 0.4 inches while improving stability against rollover. Bottom filter holes help prevent clogging from debris. The package includes one filter bag for additional filtration. The pump suits intermittent drainage of covers, ponds and tubs but is not intended for continuous unattended operation or permanent sump installations requiring automatic level control.
Highlights
- Drains pool covers fast with 850 GPH flow rate
- 25 FT power cord reaches distant outlets without extensions
- 20 FT kink-resistant hose cuts waiting time during drainage
- IPX8 waterproof build with overheat shut-off at 55° protects motor
- 360° low-profile base lowers water to 0.4" and resists tipping
Specifications
No published specifications for this item yet.
Questions about this item
How do I confirm the pump is operating correctly once it is plugged in?
The motor should run and move water up to 10.5 feet vertically at a rate of 850 GPH; the base design keeps the unit stable for 360° intake and lowers the water line to under .4 inches
What comes in the package and what must I supply myself?
Included are the submersible pump with a 25 FT power cord, a 20 FT flexible drain hose, four hose adapters (1/2, 3/4, 1, and 3/4 brass), two hose clamps and a filter bag; you only need a standard electrical outlet
Which adapter should I choose for a typical garden hose connection?
Use the 3/4 brass adapter — it fits a standard 3/4 GHT garden hose, and the manufacturer notes that not threading it all the way is normal and does not affect performance
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
