We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6U open-frame wall mount rack, 13.9 inch depth

BFKK

BFKK 6U Wall Mount Rack 13.9in Depth 132lbs Black

SKU CH-EYKW-M7JRB

A 6U open-frame wall-mount rack with 13.9 in depth and 132 lb capacity for standard 19 in equipment

  • Wall-mountable or freestanding for flexible placement
  • 9 in mounting depth suits shallow servers and switches
  • Cold-rolled steel frame holds 132 lbs (60 kg)
  • EIA/ECA-310-E compliant for standard 19 in equipment
  • Open frame with side cable points eases access and wiring

6U Wall-Mount Rack

The BFKK 6U wall-mount rack is built from cold-rolled steel with an electrostatic powder coating that resists rust and corrosion. It provides 6U of EIA/ECA-310-E compliant mounting space for standard 19-inch network, server and AV equipment. The open-frame design allows straightforward inspection, replacement and assembly of installed devices.

Suitable for shallow gear, not deep servers

This rack suits installers who need a compact, wall-mounted or surface-mounted enclosure for patch panels, switches and shallow-depth IT hardware. The three-sided square-hole pattern supports multi-angle mounting for flexible cable routing. Builders whose equipment exceeds the 13.9-inch maximum mounting depth should look at deeper cabinets or floor-standing racks instead.

132 lb capacity with 13.9 in depth

The frame is rated to hold up to 132 lbs (60 kg) of equipment, giving ample headroom for multiple switches, a patch panel and associated cabling. Usable depth runs out at 13.9 inches, so longer servers or deep chassis will not fit. The open sides make cable securing easy, but the fixed depth limits future upgrades to larger hardware.

Highlights

  • Wall-mountable or freestanding for flexible placement
  • 9 in mounting depth suits shallow servers and switches
  • Cold-rolled steel frame holds 132 lbs (60 kg)
  • EIA/ECA-310-E compliant for standard 19 in equipment
  • Open frame with side cable points eases access and wiring

Specifications

No published specifications for this item yet.

Questions about this item

Does this rack require a 19-inch mounting standard for my equipment to fit?

Yes, it complies with EIA/ECA-310-E so any standard 19-inch server, switch or patch panel will mount directly to the square-hole rails.

Can I keep using my existing shallow-depth switches with a maximum depth of 13.9 inches?

The usable mounting depth is 13.9 inches, so equipment up to that depth will fit; deeper devices would exceed the frame.

How can I verify the 132 lb rating is holding after I mount the rack on the wall?

Confirm the wall anchors are rated for at least 60 kg, ensure the top panel and bottom beam sit flush, and check that the frame shows no deflection under load.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.