We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular industrial adapter in light grey plastic housing with front label and terminal connectors

BFKK

BFKK 5069-AENTR Compact 5000 EtherNet/IP Adapter power adapter

SKU CH-JG73-EMMX9

Compact 5000 EtherNet/IP I/O adapter with 220 mA MOD draw and 9.78 A passthrough at 18–32 V DC

  • EtherNet/IP adapter for Compact 5000 I/O systems
  • MOD power 220 mA at 18 to 32 V DC with 1750 mA inrush for 70 ms
  • MOD power passthrough 9.78 A at 18 to 32 V DC
  • SA power 5 mA at 0 to 32 V DC or 2 mA at 0 to 240 V AC 47 to 63 Hz
  • SA power passthrough 9.95 A at 0 to 32 V DC or 9.975 A at 0 to 240 V AC 47 to 63 Hz

Compact 5000 EtherNet/IP Adapter

The Allen-Bradley 5069-AENTR is an I/O EtherNet/IP adapter from the Compact 5000 series. It connects discrete or analog I/O modules to an EtherNet/IP network for industrial automation systems. The unit draws 220 milliamperes at 18 to 32 volts DC with a 1750 milliampere inrush for 70 milliseconds. It is designed for DIN-rail mounting inside control cabinets.

Check power supply and network infrastructure

Verify that your DC power supply delivers 18 to 32 volts and can sustain the MOD power passthrough of 9.78 amperes. Confirm the SA power source matches either 0 to 32 volts DC at 9.95 amperes or 0 to 240 volts AC at 47 to 63 hertz with 9.975 amperes passthrough. Ensure the EtherNet/IP network uses compatible cabling and managed switches for deterministic performance.

No bundled accessories or software included

The product ships as the standalone adapter module without cables, connectors, or configuration software. Rockwell Automation Studio 5000 Logix Designer must be obtained separately to commission the device. Buyers needing pre-terminated cables, DIN-rail end anchors, or licensing media should source those items independently.

Highlights

  • EtherNet/IP adapter for Compact 5000 I/O systems
  • MOD power 220 mA at 18 to 32 V DC with 1750 mA inrush for 70 ms
  • MOD power passthrough 9.78 A at 18 to 32 V DC
  • SA power 5 mA at 0 to 32 V DC or 2 mA at 0 to 240 V AC 47 to 63 Hz
  • SA power passthrough 9.95 A at 0 to 32 V DC or 9.975 A at 0 to 240 V AC 47 to 63 Hz

Specifications

No published specifications for this item yet.

Questions about this item

What cables or accessories are included with the 5069-AENTR adapter and what must I buy separately?

The adapter itself is supplied; power cables, Ethernet patch leads and any Compact 5000 I/O modules required for the application are not included and must be sourced separately.

Which Compact 5000 power-supply version suits a 24 V DC control cabinet — the MOD or the SA input?

Use the MOD input, rated 220 mA at 18–32 V DC with a 1 750 mA inrush for 70 ms; the SA input is for separate 0–32 V DC or 0–240 V AC sensor/actuator power.

What does the 9.78 A MOD passthrough rating mean when the adapter is mounted on a DIN rail with other modules?

It is the maximum continuous current the adapter can pass through its MOD bus connector to downstream Compact 5000 modules at 18–32 V DC.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.