We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Handheld CCTV tester with 4 inch touchscreen, wrist strap, and PoE port

BFKK

BFKK 5-in-1 CCTV Tester 4" Touch Screen PoE WiFi

SKU CH-TD05-59E9P

A 4-inch touch-screen tester that verifies IP cameras up to 4K and analog formats including TVI, CVI, AHD and CVBS while providing PoE and 12 V power outputs for on-site installation checks

  • TypeOther
  • Tests up to 4K IP cameras with H.265/H.264
  • Rapid one-key network camera discovery and auto display
  • DC12V 3A and PoE DC48V 25.5W power outputs
  • 4" touch screen 800x480 with wrist strap portability
  • Built-in WiFi for wireless camera view and hotspot creation

What this tester does

The BFKK 5-in-1 CCTV tester verifies analogue and IP cameras up to 4K resolution. Installers and security technicians use it to confirm video signal quality, control PTZ functions and generate test reports on site without carrying a separate monitor or laptop.

Build and daily connections

A 4 inch touch screen with 800*480 resolution is mounted in a wrist-strap housing for one-handed operation. The unit supplies DC 12 V 3 A and PoE DC 48 V up to 25.5 W to power cameras directly, while built-in Wi-Fi creates a hotspot for wireless camera preview. An RJ45 port handles 10/100/1000 M Ethernet tests and cable TDR diagnostics.

The spec that decides fit

It supports H.265 and H.264 IP streams up to 4K alongside 8 MP TVI, CVI and AHD analogue formats plus CVBS. If your installation uses higher-resolution IP cameras or requires fibre links, this tester will not display those signals.

Highlights

  • Tests up to 4K IP cameras with H.265/H.264
  • Rapid one-key network camera discovery and auto display
  • DC12V 3A and PoE DC48V 25.5W power outputs
  • 4" touch screen 800x480 with wrist strap portability
  • Built-in WiFi for wireless camera view and hotspot creation

Specifications

TypeOther

Questions about this item

What Ethernet speeds does the RJ45 port support for network testing?

The tester handles 10, 100 and 1000 Mbit links, showing live traffic state and running PING, IP scan and port-flashing tools.

What power outputs are available on the unit for camera testing?

It provides DC 12 V at 3 A and PoE DC 48 V up to 25.5 W for powering cameras during tests.

How is the tester charged and how long does a full charge last?

Charge the 7.4 V 2400 mAh battery for 4 to 5 hours; a full charge gives about 8 hours of continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.