We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular 24V 1A power adapter with 5.5mm×2.5mm barrel plug and 100cm cable

BFKK

BFKK 24V 1A Power Adapter 5.5mm×2.5mm Black

SKU CH-16F4-Z0G2X

Converts 100-240V AC to 24V DC at up to 1A with a 5.5mm×2.5mm barrel plug and screw-terminal DC connector for LED strips, CCTV cameras and similar low-power devices

  • Worldwide mains compatibility with 100V-240V 50/60Hz input
  • Powers 24V loads up to 24W including 5050 and 2835 LED strips
  • Built-in over-current, over-voltage and short-circuit protection
  • 0 cm cable with 5.5mm×2.5mm DC plug
  • Includes screw-terminal female DC connector for solderless wiring

24V 1A Power Adapter

This 24V 1A AC-to-DC power adapter delivers up to 24W for compatible devices. It suits 24V LED strips such as 5050 and 2835 types, CCTV cameras, routers, modems and similar low-power equipment. The unit accepts 100V-240V 50/60Hz mains input worldwide.

Check voltage and current before ordering

Your device must require exactly 24V DC and draw less than 1A, for example 0.2A, 0.3A, 0.4A, 0.5A, 0.6A, 0.7A, 0.8A or 0.9A. Verify the DC jack measures 5.5mm outer diameter and 2.1mm or 2.5mm inner diameter. The adapter is not suitable for loads above 24W.

Built-in protection and screw terminal

A built-in protection system guards against over-current, over-voltage and short-circuit conditions. The 100.0 centimetre cable ends in a 5.5mm×2.5mm barrel plug, and a female DC connector with screw terminals is included for solder-free wiring. The black enclosure is designed for indoor use.

Highlights

  • Worldwide mains compatibility with 100V-240V 50/60Hz input
  • Powers 24V loads up to 24W including 5050 and 2835 LED strips
  • Built-in over-current, over-voltage and short-circuit protection
  • 0 cm cable with 5.5mm×2.5mm DC plug
  • Includes screw-terminal female DC connector for solderless wiring

Specifications

No published specifications for this item yet.

Questions about this item

Does the adapter come with everything I need to connect bare wires, or do I need a separate connector?

The package includes the power adapter and a female DC barrel connector that accepts screw-in wires, so no soldering or extra parts are required.

My LED strip draws 0.5 A — is this 24 V 1 A unit the right capacity?

Yes, the adapter supplies up to 1 A and is rated for 24 V devices under 24 W, so a 0.5 A load is well within its range.

What does the 24 V 1 A rating mean for a device that only draws 0.3 A?

The adapter will deliver 24 V and only the 0.3 A your device needs; the 1 A figure is the maximum it can supply, not a forced current.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.