We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 22U 19-inch floor-standing server rack with adjustable 24 to 38 depth and casters

BFKK

BFKK 22U 19" Adjustable Depth Server Rack 24-38" Black

SKU CH-1QPF-AGXTK

22U floor-standing 19-inch rack with adjustable 24-to-38-inch depth, 2.0 mm riveted steel frame rated for 1700 lbs, and locking casters plus levelling feet

  • TypeRack Enclosure
  • Adjustable 19-inch mounting depth from 24 to 38 inches fits diverse network equipment
  • 0 mm alloy steel frame tested to 1700 lbs ensures long-term structural integrity
  • Riveted all-metal construction with L-rails reinforces stability for heavy devices
  • Three 3-inch heavy-duty casters rated for 1200 lbs enable secure mobility
  • Included leveling feet provide solid stationary positioning on uneven floors

22U 19-inch adjustable-depth server rack

This 22U floor-standing rack accepts standard 19-inch networking equipment with a mounting depth adjustable from 24 to 38 inches. The all-rivet, nut-less frame uses 2.0 mm alloy steel tested to 1700 lbs for long-term rigidity. Three heavy-duty casters and levelling feet provide both mobility and a stable installed position.

Depth range and load limits

The adjustable frame covers a 24 to 38 inch span, so equipment deeper than 38 inches cannot be mounted. Casters are rated for 1200 lbs during transport while the complete structure is tested to 1700 lbs stationary; exceeding either figure risks instability or frame damage.

Rivet-frame assembly and rail fitting

Assembly follows the supplied guidebook using included screws and the riveted frame sections; no specialised tools are required. The L-rails must be installed to achieve full structural stiffness even if no devices rest on them, and omitting them is the most common cause of excess flex.

Highlights

  • Adjustable 19-inch mounting depth from 24 to 38 inches fits diverse network equipment
  • 0 mm alloy steel frame tested to 1700 lbs ensures long-term structural integrity
  • Riveted all-metal construction with L-rails reinforces stability for heavy devices
  • Three 3-inch heavy-duty casters rated for 1200 lbs enable secure mobility
  • Included leveling feet provide solid stationary positioning on uneven floors

Specifications

TypeRack Enclosure

Questions about this item

Which mounting depth should I choose between 24 and 38 inches for my 19-inch equipment?

Set the adjustable frames to the deepest device you plan to install plus a few centimetres for cables; the rails slide from 60 cm to 95 cm so any standard 19-inch server or switch will fit.

What does the 1700 lbs load rating mean once the rack is on my floor?

The fully riveted 2.0 mm steel frame was tested to 1000 kg, so a fully populated 22U cabinet with heavy UPS batteries or blade chassis remains structurally sound.

How do the 3-inch casters and leveling feet work together in practice?

Roll the 1200 lbs-rated casters into position, then lower the leveling feet to lock the rack solid and remove weight from the wheels.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.